I guess my initial post was confusing for some folks so, I'm editing for clarity. This is NOT the Sidewinder Mini. It's a standard length Sidewinder that I had the barrel machined 2.5 inches shorter and crowned (my thought process was, it's not a mini...it's not standard length...I'll call it a compact). The same machine shop rethreaded the gauge ports as well. I apologize for any confusion...

I'm selling my .25 cal Sidewinder, as pictured. I shot a magazine through it prior to modifying it and then, another magazine through it after the modifications. It's pretty low mileage. I shortened it 2.5 inches and retreaded the gauge ports for 1/8 BSP to accommodate the Sekhmet gauges. I'm selling it as pictured with the Vortex scope, DFL moderator, Hogue grip, Magpul rail cover, Steiner laser/light, bipod, and whatever else you see that I'm forgetting at the moment. I'm having trouble locating the original soft case that came with it so, it included the case pictured. Also, it will come with the factory shroud and moderator pictured as well as the charging cabled for the gauges. The Vortex is new and I have the box and literature for it as well but, none of that for the Steiner. I installed the hair roller type "moderator" thingies around the barrel toward the bottom of the shroud. The moderator adapter is DFL and was a limited run he put out a while back.

There are a couple hard to notice marks (near rear gauge, optics mounting mark on the rail, by the regulator, and some wear on the Steiner from it being on a pistol in a former life) that could be easily touched up or "sharpied" a little better than my quick attempts. Anyway, it comes as pictured. Although the other moderators are for sale as well, they are not included in this listing...I just forgot to clear the bench before taking pictures. Only the one on the gun is included.

I'll take 2k for the entire package on Paypal F&F plus $45 shipping to the lower 48. Kelly at Krazkool gave me permission to list him as a reference that I'm a real person and honest in his experience however, he cannot vouch for the gun since he's not handled it. Thanks for looking and, this is my first sale post so, my apologies if I jacked it up. Oh yeah, I'm in Missouri...north of KC about 45 minutes if someone wanted to pay cash and pick it up.

I have a .22cal 800mm barrel kit and tension setup. It comes with barrel housing, transfer port, , heavy superior liner 1:14 twist, CF liner sleeve, and official FX carbon fiber tension kit that has the barrel holding clamp and jam nut with 1/2" x 20 UNF threaded end.

This is like new condition and has no marks/dings even on the outside of the barrel housing. This is perfect if you want to get max power in .22cal with slugs. Can reach out to ~100fpe if paired with a Powerblock M3 w Tungsten hammer. This setup was used without a tungsten hammer tuned for 34grn slugs at 980fps (72fpe) for extremely good accuracy and still a decent shot count, but there are no signs of hard use and the barrel will be cleaned before shipping so it will be very close to a new setup.

I would like to sell it only now, I have been away/busy from the forums and financial and time constraints bring me to choose to sell this instead.

This setup would normally cost $399 new and are almost always out of stock/pre-orders needed.
Here is what it comes with, same as if bought new at Pyramyd Air or Utah Airguns.



I would let it go for $375 SHIPPED since it is like new, save some overall $, shipping cost, and wait time (usually 2 weeks or more)

I also have positive feedback on the old yellow forum BOI as well as ebay if you would like to see.
Here are some pictures (not the best) and more/specific shots can be taken upon request.

I have several sets of scope rings that I am not going to ever use, most are new and unused.

Small Print:: Just select the letter of the pair you want. PM me your selection, attach your address and Ill throw them in a padded envelope and mail them off to you. Ill strike that letter off the available list until they are all gone. This is first come, first choice.

Throw me a few bucks for shipping and we are all happy!

E & I, F & G, A & B, H, C & D, J are taken and removed from the list.

Rings are in the wind!


K

L

This might be a kit for 2 rebuilds but I’m not 100% sure. Found it in a drawer and no longer need it. $25 shipped in continental USA.

This is a used Mad Dog Stock. Fit the Condor SS for sure, maybe others, your call. Have both mounting bolts. I had drilled a 5/16 hole in the bottom of the grip for weight. There are 2 holes drilled in the forearm where I had a rail mounted on it.

$120 shipped within reason.

Looking to part with my FX Crown VP. Purchased from UA Christmas of 2022. Single owner.

Synthetic Stock

380mm .22 Barrel - STX Superior 1:24 Twist

Comes with 1 Mag

Case not included

Current tune , Velocity is maxing out at 915-920fps with 18gr FX pellets.

Small scratch on shroud(pictured)
light scratch on bottle(pictured)

Asking $750 shipped CONUS.

Pay pap FF please or usps Money order. Will ship after it clears.

Please PM if interested.

I have 2 for sale. Ideally would like to trade for 25 cal mags. Otherwise, 45 shipped each.

One sold! One more to go!

I have 5 tins of H&N hp II 30gr in .217
1 tin open but not missing any slug
I would like to trade with H&N .218 message me if you have .218 25gr and up and would like to trade

In very good condition. Mechanically sound (tracking, turrets, magnification etc work as they should). Some scratches in the finish, shown below. Model number 26015, MOA-2 non-illuminated reticle. 2nd owner, & I do not have the factory box.

$275 shipped CONUS, PP F&F or USPS money order. Not interested in trades.

This is a never been mounted scope. $1100

For sale/ trade is an awesome little bullpup.

Made some modifications like a quick fill port using a standard foster type fill fitting. Had a faulty Pressure gauge, and I've had excellent luck with this procedure on my personal guns.

Just resealed cylinder.

I added a very sturdy rail for mounting a scope.

Moderator included, very quiet and looks great too. The Pup is shooting near factory setpoint, can be made to shoot faster but had no need to adjust power.

Can include a 4x duplex scope for free, or a crosman 3-12 side focus scope w/ rings for $70 more.

I also have other scopes for sale if interested just ask.

Asking for $575 $450

Will trade for ProSport in 177, or maybe a tx200 in 177, or other springers in .20.

Call or text: (Nine16) Five31-2349

Or email: camsprecisionairguns(@)gmail.com

Looking for a Dreamline .177 Pellet Probe. If you've got a spare or one you're not using drop me a reply.

Thanks,
Tom

Selling a beautiful sidewinder ED, very usable reticle, comes with all the factory accessories including 1/8 moa and 1/10 mil turrets.

I also have one of the factory large sidewheels that is included with the scope.

These focus to 10y, and work great for FT.

I'm asking $675 plus actual shipping.

camsprecisionairguns(@)gmail.com

Or

(Nine16) Five31-2349

Beautiful safe queen. No regulator,no leaks, no problems. Scope and mounts not included. Anthony Story direct fit moderator and 3 factory magazines are included. Has Best fittings foster fill upgrade. 850.00 shipped conus.

They are as new !
Picatinny/ weaver mounts .
30 mm .
Asking 55.00 $ and i will pay for shipping to your door in the lower 48.
Postal money order only .
Thanks Ray

Selling a very lightly used FX Impact M3 with a 700mm barrel and a 480cc bottle. Purchased it in December of 2023 From Utah Air.It is currently tuned for JSB 18 grain pellets.

Includes Carbon liner sleeve, K&L probe holder,Marksman’s Backbone rail and a Saber Tactical Arca rail.$1900 shipped paypal

WTS JSAR Raptor .25 with 1 mag. $1250 shipped. Trade for FX Impact MKII. Thanks!

Hello everyone, I'm selling my FX Dynamic Express 700mm 25 cal, 95% new, with box and all original accessories, excluding the scope. It includes a Saber rail, a brass bridge, a moderator, and two magazines. The asking price is $1500 without saber things(Saber rail and bridge can sell separately, price is $ 300 shipped CONUS SOLD) shipped(CONUS). Zelle and PP(excluding Fees) are accepted. Please PM if interested. Thank you!





View attachment 460823

View attachment 460824





View attachment 460827

I am looking for a genuine first gen Benjimin marauder pressure tube, not a after market aluminum one.

Nice condition with one piece mount
The Bushnell Banner 6-18x50mm riflescope's 18x magnification and 50mm objective make it ideal for long-range varmint, silhouette and target shooting.
tube diameter 1"

• IPX4 Waterproof construction
• One-piece tube
• 1/4 M.O.A. fingertip, resettable windage and elevation adjustment
• Fast-focus eyepiece

Payment pay pal or US Postal Money order 80 shipped CON USA TYD

Hey all -

I want to buy an Evanix Viper, chambered in .25 or .30 (much prefer the .30) - offering BTC/Bitcoin, or you'd accept CashApp or Strike payment.

Looking for the full package including double mag and LDC.

Hit me up via DM with pics and your asking price, please.

Thanks,
Mark

Evanix DUK AR6-30, rare and in excellent shape. 3 o-rings in the entire rifle. Easy to work on and stacks hades/atomic pellets, holds moa to 100yds which is as far as i have taken it. Great trigger in single action. It will fire in double action, but it is not recommended, less power and very heavy pull. It doesnt get shot much so hoping someone else can use it. Ready to go, bipod is not included, scope, 2 mag cylinders and bottle clamp are included along with 2tins of jsb/ fx pellets. $800 shipped or possible trade.

New, old stock. Ship weight: 1lb, 8oz. Dimensions: 14.5" x 11" x 6". Buyer pays actual UPS ground insured (Pirate Ship). Paypal FF/Venmo/Walmart2Walmart or PP G&S (+3.3%). Asking $55 + shipping.

I bought this from another member a few years ago and need to clear up some space now. This looks to be from MrodAir from the printing on the side. It’s a .177 caliber not tuned or anything but does shoot pretty well for what it is and has a folding butt stock. I’ll take $50 obo plus shipping to the lower 48. Cool little rifle just can’t take it with me!

I have a like new Arken Zulus HD 5-20. I put it on my Sidewinder Compact and shot it once. And put back in the box. Asking 700 shipped TYD. Any questions please or need more info, please let me know. Thanks for looking.