Hi All,

Moving along a 1 month old FX Impact M3. This is the sniper version with 580cc bottle and 700mm barrel (s).

This package includes 700mm barrels in .22, .25 and .30.

All barrels have the new CF sleeve installed and the following liners are included.

.30 Superior 1:22 twist

.30 Superior slow twist 1:38

.22 Superior

.22 Superior Heavy

.25 Superior 

.25 Superior Heavy

Basically each caliber has the standard and heavy Superior liner. Comes with one high capacity magazine per caliber as well.

Gun has the KLS-2 butt stock and bag rider as well as angled manometer bracket installed along with the Ergo zero angle grip and since this gun is designed for swapping between calibers it has the Kraford&Lypt upgraded probe holder installed as well.

Comes with the new DonnyFL Fatboy moderator which has all three caliber inserts so one moderator will work across all barrels.

Ships in FX hardcase with all paperwork etc.

Scope, rings, Atlas bipod not included.

3800.00 OBO (Honestly didn't price it all out but rough math got me close to this price but feel free to make me an offer if I am off base) shipped and insured partial trade for DayState Redwolf HP or Safari .22, RAW HM1000x .22 or .30, RTI Prophet Performane. 22, FX Crown MK 2 .22 or .30. Will not be splitting up at this time.

I have a practically brand new gamo urban in .22. It has a very small leak somewhere, and I honestly just don’t have the time to look for it. It’s my backup rifle to my backup rifle, and has barely had 100 pellets through it. 
it will come in original box with 1 mag and fill probe. 


asking $200 shipped Tyd conus. Message me for more details and pictures. No tire kickers please, just looking to send this to a good home. Has the extremely accurate bsa cold hammer forged barrel in it. Won’t find anything better for the money. 
will throw in 2 tins of Crosman hollow points also. 


thanks for looking!

Got an HW100 in .22 cal. Exactly as advertised. Fantastic deal for a beautiful, classic rifle.

WTS .. 2 new cricket plenum... $60 each one PayPal .

Purchased .25 cal FX Crown in Pepper Laminate. Beautiful & a real shooter. Super deal, too!! Thanks.

WTS .. texan 308 barrel $135 shipped 3 day priority.. will fit texan. 257 .. without any other modifications you be shooting 308 to .. pay for or ad the fees.. thanks 

Basically unused (I'm more into rifles). Put less than 50 rounds through it. Like new in box with all the accompanying accoutrements. 6"bbl, 6 shot capacity.top break action is a hoot.

Feel free to message me with any questions.

$100+ shipping. 

Hi All,

My neighbor has been getting into PCP shooting of late and has decided he would like a RAW HM1000X. 22 to go with his M3 so want to pick one up for him. He is also open to a .30 as well (or both possibly).

Stock color etc. not important however preference is to the NON tactical stock (not a deal breaker for the right deal).

PayPal only for pmt.

Thank You!

I dont need the scope any more as i dont have my p1 anymore. $85.00shipped paypal f&f or +3%.

the scope has wear on the body, scope scuffs, knicks here and their. the outside of the glass seems to be in good shape. The inside of the glass has developed dirtyness on the surface of the glass and tiny particles of debri. you would not be able to tell in the pictures. in person if you hold it at an angle towards the sky you can see it. however, when i used it their was nothing that would hinder me from seing the object i was aiming at. it looked clear. pistol scope has very long eye relief. you can also hold it closer and see through it. would accomodate a pistol or rifle.

I am a USA distributor for the custom FX Impact Laminate kits.

Price on sale for 2022!! I have 5 kits and 16 Grips left in Stock!

The Kit will includes Grip, Butt, Cheek rest, and Cocking Handle.

The Kit is $200 shipped. $170 shipped

The Kit will includes Grip, Butt, Cheek rest, and Cocking Handle.

The Grips is $135 shipped. $110 Shipped

Grips fit FX DreamTac also

These will Takes your FX Impact to another level!  

The Grips is $105 shipped. 

Grips fit FX DreamTac also

These will Takes your FX Impact to another level!  

2 Green Kits

2 Red Kits  1 Red Kit

1 Grey kit  SOLD

3 Red Grips

3 blue Grips

5 Grey Grips

5 Green Grips







All will be shipped Priority Mail with tracking #. 

Will accept PayPal, Friends and Family, or normal PayPal with buyer to pay 3.5 % fee. 

CashApp, VENMO, and ZELLE.

If you have any questions, you can contact me @ 504-231-2466. 

Thanks for Looking,

Andy

anyone got a take off new style impact grip thanks Rob 

want to sell my scope. this is an older sightron scope back when sightron would make the si's in japan. has a mildot reticle , second focal plane. very minimal markings on body of the scope and clean glass. no major markings on glass or small markings. the glass is very clean. $160.00 shipped , paypal f&f or +3%

I'm selling my Modified FX Impact MKII and all the accessories except for the scope and bipod.

$1600 shipped to the continental US only, No Trades. Paypal Friends and Family only. Check my accuracy and seller feedback to see that I'm well established and very honest.

The gun was originally a 700mm .30 but I also ordered a 600mm .22 barrel kit/assembly.

This gun comes with a 700mm STX standard liner, a 700mm STX heavy liner, and a 700mm Superior Heavy liner all in .30

It also includes a 700mm STX liner, and 600mm STX liner in .22

A barrel housing extension is included to turn the 600mm barrel housing into a 700mm barrel housing.

There is also a .22 and .30 carbon fiber sleeve in 700mm length but not bonded to anything.

This guns ports and pellet probes have been modified by myself for extra power and efficiency. The rear block has been milled to take a 14x1.5 threaded external plenum and the valve housing is modified to accommodate the external plenum. There is a Huma high pressure regulator installed and comes with an extra in the form of all new parts. There is also an eccentric plenum installed. It's about 75cc and the predecessor to the FX power plenum. Wika gauges are installed and have 3D printed cover on them.

There is 1 original sideshot aluminum magazine that has been milled to accept 66gr flat base slugs. There is 1 original sideshot aluminum magazine in .22 unmodified and 1 original delrin .30 FX magazine that is standard capacity. The modified pellet probes have a hole for a roll pin that you can use or not and I'll include a new unmodified .22 pellet probe.

This gun does not have any leaks and shoots great. All you need to do is configure and tune to your liking. The gun makes over 130fpe in .30 around 150 bar and over 70 fpe in .22 around the same pressure. As seen in the picture the two original liners have some discoloration on their exterior from being in my shop for years but all are nice internally. If I run across any other extras I'll include them. The original hard case has had the foam trimmed to fit my scoped gun.

drop block with kral fill adapters got to kral nipples and qucike did con nect with drop block will need brasse screw replaced but it has valve asembly 

Looking for a Crown arrow kit. Thanks Catman 

I am looking to trade a 600mm m3 shroud for a m3 500mm shroud. I have both pellet size adapters for it. *Top is the one I am looking to swap. 

I have a used K&L gravity rail for the impact has some wear use from mounting on the tripod and the fill port. $100 TYD 

I have an Avenger in .25 caliber up for trade. 

Comes with 2 magazines and 1 single shot tray.

Factory Tune. Under 50 pellets down the barrel.

DonnyFL Shroud Extender 1/2x20 Adapter Installed.

I am looking for an FX Impact .22 500mm barrel kit, .25 600mm Barrel Kit, FX Impact aftermarket accessories, Supressors in 1/2×20 threads, or Quality Optic.

Trade Value ~ $400



Scope, Rings, and Bipod not included.

Will throw in a full tin of pellets with trade. Your choice between FX 34gr, JSB 34gr, or JSB Hades.



Thanks for Looking!

- Casey

Brand new in original box. Never used.

$500

Buyer pays shipping and must pay via PayPal.

I have 2 older style recoil pads that I am not using $35 each TYD if you want both pm me and we can work a better price. I also have a k&l plenum cover for the original skinny plenum $25TYD

Hi there!

I'm looking for some Leshiy parts and accessories:

* Alfa barrel in .177 - either 250 or 350mm

* Might be interested in a Valkyrie kit - let me know what you have

* Micata grip - any color 

* Carbon bottle - 220, 300 or 350ccm

Have anything that you don't use and want to part with? Please let me know!

PS: I'm located in Norway, but I will of course cover the international shipping. Bought and sold on this forum several times, can provide links to feedback and references. 

Selling a crown continuum synthetic stock no issues, time to thin down again...will come with 2 mags 1is stock other is a carm, 700mm barrel, upgraded to 580cc bottle, fx can moderator loves jsb 18 grains at 890fps. Any questions pm, Paypal ff or ad 3% for fees asking 1350.00 shipped in the lower US.

Gun is a first gen Green Mountain barrel equipped rifle. It includes all original paperwork plus box and two mags. Gun currently shoots H&N 26 gr hollow points at average of 815 fps for two mags equaling 16 shots from a 3K fill. It also likes H&N FTT 19 gr and JSB king 25.4. Gun currently has a 6k psi gauge that I installed in a pinch when original gauge failed. It tracks well and no leaks so I never replaced it. I will however include a new Crosman 3K psi gauge.

gun shoots inside 1/2 inch at 37 yards and carries it well farther.

Asking $550 shipped conus PayPal F&F or you pay fees. Thanks 

Getting rid of some stuff in prep for a move to where I won't be able to target shoot at home. Only airgun use for me will be hunting. As such the only trade I would consider would be for a .22 (or larger) carbine or semi-bull pup. No bullpups they just don't work for me in the woods.



Prices are plus shipping from 21009. Guns will be double boxed



Cricket Compact in .177 – RARE in the USA. Comes with 2 mags. Excellent accuracy. Very light smooth trigger. Quiet. Loves the 10.34 JSB and is tuned to shoot them avg 905fps (18.8FPE) Comes with cheek piece too. $950 (Scope/wheel/rings in pic can be added for $100) TRADED



FX Logun Solo in .177. Great shape, very good trigger and very accurate. Custom shroud and I do have the original shroud which didi little to quiet the gun, but it does allow the addition of a 1/2-20 silencer. Loves the Crosman heavy in box. Tuned for 40 plus shots at avg 900fps (18.9FPE) $390 – Have 2 unopened boxes I'll include with sale for $50 additional.



Hatsan Flashpup in .22. Camo painted, Peek hammer insert, End cap drilled and tapped for easy HS adjusting. Adjuster has been removed from the hammer so no removing stock to adjust. Just remove the butt plate. Tuned for the 18.1 FX pellets at avg 890fpd (31.8FPE) Also has 3d printed baffles to quiet it even more then stock. Shoots one hole off bench at me 25yd distance, but I just can't keep a good group freehand/supported when holding the gun tight. Not shown in pic are the SS tray, 2 mags and the adjustable cheek piece. $300 SOLD



Beeman Chief 2 Plus in .177 – Tuned for 12.5 NSA slugs at 975fpe (26.4FPE) also shooting Heavy Eunjin, H&N and JSB's great. Gun modified for easier cocking. Hammer is tapped and supported by the tune. (Look up the FAME mod for the MRod) Underside of breech has been “milled” out by hand so it works great, just not pretty. Not shown in pic are the ss tray and 2 mags - $170 – Also have 2 boxes of slugs (unopened), 3 Eunjin, 2 H&N Sniper and 2 13.4 JSB to add for $90 SOLD



RTI Priest 2 - .30 cal LW barrel, probe, end cap, hammer weight, 2 mags and a SS tray (bottle in pic is gone)- $175



NOE .22 and .30 pellet molds, handles and ladles. Molds never used - $250



After guns sell I'll likely have more ammo, more accessories and a tank to get rid of.



I don't get on the site much anymore so please be patient on replies.



Thanks