I installed a drop block and bottle in my PP750 and set the reg to where the factory reg was set. I’ll see how many shots I get with the 220cc bottle tomorrow
Upvote 0
What did you do airgun related today.
- Thread starter Florida_Man
- Start date
Changed stocks and adjusted the trigger on my PP750. Work in progress, but it’s fun. It shot GTO alloy pellets well today.
Once I modify it the way I like and tune it, it will get a Discovery fixed 6x scope. Until then, target work requires my Sightron fixed 24x
Once I modify it the way I like and tune it, it will get a Discovery fixed 6x scope. Until then, target work requires my Sightron fixed 24x
Upvote 0
I took the Akela apart last night. Polished the hammer grease the contact point between the spring and hammer. As well as the adjuster, to hopefully dampen the vibration that's coming from inside. Topped it off as well as my Vulcan 3 30, U2 .22 and put a scope on the new delta.
Upvote 0
Got the AR2078 stock back from my mates paint shop today, colour is BMW/ Mini 'Hot chocolate metallic'......
Upvote 0
Sent a couple mags down range from my Impact M3 after stowing an order of pellets from Pyramyd air. Great way to relax after work.
Upvote 0
Finally got to install a scope on the HW 90 in .20. Checked the pressure in both HW 90s. Installed the HW moderator on the 20 cal. Waiting on the moderator for the 25. It is paid for. By the time it arrives I will have made an airgun moderator myself. It helps with cocking leverage a lot. Received a package of assorted pellet tins in 177. Lighter ones for the LGV and the P1 and just plain stock. Be Well Brothers, B.
Upvote 0
I took the spinners out to the farm & put a few shots out at 27yrds w/ the Stoeger Bullshark & the Kral NP03. Then headed over to another farm & took down
two starlings w/ the Bullshark.
two starlings w/ the Bullshark.
Upvote 0
I shot 72 pellets of various brands through my Pp750, it did not like these Stoeger pellets at all, but hey it’s fun trying stuff.
Upvote 0
My friends snowpeak like those stoeger pellets, well for shorter ranges at least, also the same flavor from H&N
Upvote 0
What pcp is that? That whole moderator looks to be like 12-14 inch'sFor an early Xmas present to myself, I Picked up a DFL Yokozuna, and a QD base section that will fit my Fat Boy v2.
But since I also have the Extension w/k-baffles I machined for the FatBoy. I wanted still wanted to use it.
So I machined the existing base of the extension to fit the threads on the Stub of the QD Base.
I measured it at 25mm x 1.00mm pitch..
So I first Machined a piece of Delrin to test fit...making sure the 25mmx1.00mm was right,
It worked, so now to machine the extension base....
Perfect fit. So now I can use the extension too with the QD system!!
_________________________________________________________________________________________________________
This how my Setup looks now....... added the DFL QD Bayonet to the front if the DFL Extension...
This gives me more options.......
Upvote 0
one less rodent in the world. It’s what the atomic was built for. Unfortunately I forgot to press record on the pard.
Upvote 0
Scoped my buddys custom delta with a different scope as the first one had too tall of rings on it, and sighted it in either 33.85gr JSB pellets. Took out 32 iguanas with the Akela and the V3 .30 500mm, and shipped out a scope.
Upvote 0
