Snowpeak Snowpeak M60b or Umarex zelos parts list

Hello all. Does anyone have a parts diagram/ schematic of the snowpeak m60b or the umarax zelos? I had to reseal on of my avenge x rifles after the burst disk popped while filling at around 3k psi, which caused other orings to fail so I replaced them all. Anyway while I was doing that i realized that I don't have a parts diagram for the snowpeak m60b i have. If anyone has one It would be greatly appreciated. Trying to get the sizes for all of the orings for it.
 
  • Like
Reactions: plinker52
I have a Zelos which got some manufacturing debris stuck in the valve of the adjustable regulator. I was able to find some videos on u tube that helped me with 100% disassembly. I could not find anything for the Zelos mine in. 22 as far as parts go , but this is what I did. I removed all the O rings with an o ring pick then went to my local ace hardware store here in Tucson , Az , and there was a guy who helped me with the o rings from a bin labeled gas o rings. We matched up the ones I got by placing then side by side. I also found some belliview spring washers there for useing in the regulator. This was first PCP I ever took apart it was harder to work on than the regular guns I gun smithed. I went to Snowpeak web sight no luck. Checked out the Airgunarcheryfun site but never did talk to Wes I hear he is good guy. Maybe Wes can scoop up some seal packs for the Zelos , or Snowpeak
M60 they do have slight differences.
I'll keep my eye on this thread , and hope we can find some parts.
 
  • Like
Reactions: blackdog899
Hello all. Does anyone have a parts diagram/ schematic of the snowpeak m60b or the umarax zelos? I had to reseal on of my avenge x rifles after the burst disk popped while filling at around 3k psi, which caused other orings to fail so I replaced them all. Anyway while I was doing that i realized that I don't have a parts diagram for the snowpeak m60b i have. If anyone has one It would be greatly appreciated. Trying to get the sizes for all of the orings for it.
Got it check this post.
 
Hello all. Does anyone have a parts diagram/ schematic of the snowpeak m60b or the umarax zelos? I had to reseal on of my avenge x rifles after the burst disk popped while filling at around 3k psi, which caused other orings to fail so I replaced them all. Anyway while I was doing that i realized that I don't have a parts diagram for the snowpeak m60b i have. If anyone has one It would be greatly appreciated. Trying to get the sizes for all of the orings for it.
Did you get that seal kit yet.
 
Same gun, different levels of quality control. The Snopeak being of higher quality. UX will not sell parts or provide media/information to maintain and repair yourself. If you call them with a minor issue their response is "Send it in to us".
Wes will be every Zelos buyers solution for parts, etc.
Curious as to where this info comes from. Aren’t they made by the same company? Do you have both?
Sorry I’m getting defensive about my zelos. Haa
 
  • Like
Reactions: OldVet
Same gun, different levels of quality control. The Snopeak being of higher quality. UX will not sell parts or provide media/information to maintain and repair yourself. If you call them with a minor issue their response is "Send it in to us".
Wes will be every Zelos buyers solution for parts, etc.

I'll call BS on this statement. SPA or SnowPeak Arms, are the manufactures, Umarex is the US distribution arm.

There is no quality difference between the M60 and Zelos. If you see or have seen differences, post them but a blanket statement like that is false.

Furthermore, Umarex, being a distribution company, can determine any conditions it wishes to have concerning parts and service.

The same exists with any other distribution company.

Wes, being in Canada, is in the worldwide SPA distribution network, he can get items that contracts with Umarex prohibits from SPA, likely due to restrictions from the US.
 
  • Like
Reactions: blackdog899
I'll call BS on this statement. SPA or SnowPeak Arms, are the manufactures, Umarex is the US distribution arm.

There is no quality difference between the M60 and Zelos. If you see or have seen differences, post them but a blanket statement like that is false.

Furthermore, Umarex, being a distribution company, can determine any conditions it wishes to have concerning parts and service.

The same exists with any other distribution company.

Wes, being in Canada, is in the worldwide SPA distribution network, he can get items that contracts with Umarex prohibits from SPA, likely due to restrictions from the US.
I love it…
my first air gun was a Umarex from tractor supply. I needed a pellet gun quick. In the past would use subsonic 22lr but new bicycle trail behind house stopped that. Got the Synergis knowing nothing. Threw the cheap included scope on and sighted in . I was impressed. Changed scope to a cheap Mueller I had and commenced to killing vermin.
This got me researching Airguns. Fell into it for now and the zelos was the second gun. Damn if this is a cheap gun what are expensive ones like. I have since acquired a Daystate revere and a RAW 1000x lrt. Still feel the love for Umarex
 
  • Like
Reactions: keefd
I love it…
my first air gun was a Umarex from tractor supply. I needed a pellet gun quick. In the past would use subsonic 22lr but new bicycle trail behind house stopped that. Got the Synergis knowing nothing. Threw the cheap included scope on and sighted in . I was impressed. Changed scope to a cheap Mueller I had and commenced to killing vermin.
This got me researching Airguns. Fell into it for now and the zelos was the second gun. Damn if this is a cheap gun what are expensive ones like. I have since acquired a Daystate revere and a RAW 1000x lrt. Still feel the love for Umarex
Just wanted to express my love for my .22 caliber Zelos as well this was my first PCP with an adjustable regulator.
I wanted to shoot the 28 grain hollow point slugs I already had ,band when I seen Nates video that said you could turn it up to 3000 I set the reg at 2,700.
I don't have a Chronograph yet , but I was shooting slugs in the same hole.
I only got 10 shots then it fell off the reg , so I bought a 500 cc aluminum bottle from Walmart for $35 , and an adapter from eBay for $5 . I had it going great untill my Vevor quit on me..
 
I have the diagram but have not gotten the oring kit. I will wait a bit on the orings until i place another order for orings from https://www.oringsandmore.com/
I believe that the rifle came with extra orings, will just have to measure them before my next order whenever that will be. Just wanted to have extra for whenever i need them. I have enough orings to reseal the avenger, avenge x as well as fxm3 about 30 times each.
 
  • Like
Reactions: OldVet
I'll call BS on this statement. SPA or SnowPeak Arms, are the manufactures, Umarex is the US distribution arm.

There is no quality difference between the M60 and Zelos. If you see or have seen differences, post them but a blanket statement like that is false.

Furthermore, Umarex, being a distribution company, can determine any conditions it wishes to have concerning parts and service.

The same exists with any other distribution company.

Wes, being in Canada, is in the worldwide SPA distribution network, he can get items that contracts with Umarex prohibits from SPA, likely due to restrictions from the US.
Evidently you've missed the posts by folks complaining that they are finding ridiculous amounts of metal filings in their Zelos rifles. It is common knowledge that any "knock off" is or can be plagued by issues caused by cutting corners.
 
  • Haha
Reactions: Firewalker
Evidently you've missed the posts by folks complaining that they are finding ridiculous amounts of metal filings in their Zelos rifles. It is common knowledge that any "knock off" is or can be plagued by issues caused by cutting corners.

Nope, not one...

It's not a knock-off, no corners cut, this is just rhetorick.
 
  • Like
Reactions: blackdog899
If any Factory airgun is worked on by a person who knows what they are doing from cleaning the gunk out of the barrel to hot rodding it to swell , and back. Is it not a better airgun. And remember I said knows what their doing. There are plenty of times when I read where an airgun was sent out to someone to work on it. I agree with firewalker re tore ick.