1900colt's latest activity
1900colt replied to the thread How to refill grease pot on GX-CS4 Compressor?.Correct. As the compressor cylinder head warms up, the grease will too and will flow easily. Without that rubber, you'll have a lot of...- 1900colt reacted to Back_Roads's post in the thread Compressor - New GX CS4 Performance Issues! with
Like. There was also a recent video, concerning proper air purging out of the units radiator, It involves running the water pump and tilting... - 1900colt replied to the thread How to refill grease pot on GX-CS4 Compressor?.You need that rubber piece in there. Without it, your compressor will be easily over greased and plug up...requiring a flush of the...
- 1900colt reacted to BlackICE's post in the thread Why El Cheapo compressors are no bargain with Like. Yep. If you have 2 large tanks shooting at a remote location probably never run out of air. Use one tank shooting, while the other one...
- 1900colt replied to the thread Why El Cheapo compressors are no bargain.I'm not sure how much someone really wants to spend for "fast"... but when we take out some guns that are airhogs, we'll take the tank...
- 1900colt replied to the thread Why El Cheapo compressors are no bargain.When I bought my first YH. The cost vs useful life was considered by what it was going to cost to fill my bottle. 45 min drive to shop...
- 1900colt reacted to jclark's post in the thread Gx cs4 and cs4-I water fill and lower temps... with Like. Thanks for the tip! Checked my new CS-4 this morning and there was some air! Added water and continued to run and tip until the water...
- 1900colt replied to the thread Gx cs4 and cs4-I water fill and lower temps....Video showing the amount of air trapped in some of the CS4 and CS4-I radiators
- 1900colt replied to the thread Question about the Gx CS 2.Yes, it matters. The cylinder itself has been revised over the years. Some have holes in the side, some have the bottom of the cylinder...
- 1900colt replied to the thread Question about the Gx CS 2.It depends on the date of mfg. Cylinder cooling designs have changed over the years.
- The connections under than black plastic cover are hokey too! I replaced it with 3d printed one with a power switch and also upgraded...
- My CS 4 has got almost 22 hrs. on it now and I had noticed that it seemed to be pumping slower lately. I did the thing of taking out the...
- 1900colt posted the thread Gx cs4 and cs4-I water fill and lower temps... in Tanks, Pumps, Compressors.When you are first setting up the CS4 models. The radiator water comes in and out at the bottom. If you lean the compressor over, you...