1900colt's latest activity

The limit is endless, completely screwed down and it will never vent. If you're using 3600psi max, set it to start venting just above...

Update The pressure release valve is back together, and the CS-3 is running fine. With a deadhead in the line, I incrementally increased...

3:00 hours 80.4 f 2975 psi

Thank you very much @1900colt I'll put it back together this evening And of course, report back Edward

Follow that video, just filling without tilting it will not get the air pocket cleared. Only easy way I know of to get it completely...

The originator, read his posts he was getting high temperatures

I don't know if he ever blead out the factory one, if not, high temps would definitely occur. You can actually feel the air blowing...

I got this from “ hotspark” he was having an actual problem

I have added a radiator and computer fans, I got the idea on here and I will find his name for credit. This was done after the 5 hour...

They get a big pocket of air in the radiators sometimes. Causing them to overheat. Just bleeding that air out will drop temps and...

Also... was the water properly filled to get rid of the air pocket?

Did you bleed the air pocket out of the radiator. It'll drop temps significantly, I've seen close to 20 degree drops

Hmmmm! Maybe I don’t feel my cooling project was so needless now.

Here you go The first one on the pin will be bent upward... and then just go back and forth until completed

Just a little update for run time I noticed from the tuning I've been doing over that last several weeks. The "GX CS4 Internal" now has...