Airgun-hobbyist's latest activity

Is the barrel parallel to the air cylinder? From the picture it looks like it droops down towards the front. If it is, that is why...

Just changing rings to another set will not likely change the relationship of the scope to the barrel and rail. Is it possible to use a...

He's big. About 300#. One of a dozen or so they killed over Thanksgiving holidays. No teeth left. His cutters were worn down to nubs...

Ring height, comb height, and cheek weld all play into that.

I used my GX CS4 the other day too and compared to my YH the silence is almost unnerving It's weird to be able to hear yourself think...

Remember that they should still be sized correctly after powder or your results will be tainted.

In theory, it the aim point shouldn't move when zooming or focusing parallax, but should just get more in focus to the eye. If the...

<deleted> it was a scope problem

I did a write-up on this barrel nut to shroud interface, as it actually can kick the long moderator enough to the side to create a...

Yes, it would be in your best interests to buy something with both smaller minimum and higher maximum magnification level than you'd...

I guess that would depend on how well it is copied, built, and the quality control process and procedures, or lack thereof. The only way...

I keep reading that there's less accuracy with pellets and light slugs out of these Rattler's. Try a longer slug. This barrel has a...

Having recently sold my Brocock Ranger , I found myself with an extra optic. Not much action in the classified ads for a 4x prism...

Try all the other pellets brands, JSB, the JSB variants from Air Arms, FX, Regal, and so on. Then you need to test, test, test. Test...