Airgunmann's latest activity

The blank cleaned up nicely but now I remember why it never got finished. My lathe had a through bore spindle of 1" and the blank is 1.25"

I believe huma air has caliber change kits but not for barrel length

I agree hopefully some one with more knowledge will chime in on the v3

ok maybe you can back off the power wheel a turn so the hammer spring will have less preload but if it were me id figure out how to...

Its hard to say there may have been a return spring in the valve that some one left out for power reasons Wouldn't know for sure but...

Ater looking at the plenum / regulator idk if id use it one spot says 250 bar the gauge shows red after 200 bar just my opinion

Did it come with the Texan valve too ?

I think your on to something there he has to cock it to take pressure off of it to see if it then seals up faster

Yup look for a happy medium

Kinda depends most are medium weight and top out below 150 bar and speed your looking for so it would be down to what your shooting...

My delta wolf enjoys mk2 34 gr jsb pellets as well

What's the barrel length ?

This Delta Wolf is a .25 caliber laser beam! Slinging 34g MK1 Heavies at 900 FPS

Have any of you 3D printer guys ever thought about or tried printing plastic pellets? I figured speed would be off the charts &...

40 gr will fit in qd fox 3d printed magazine i was refilling once a magazine