Airgunmann's latest activity

My friend loves his dynamic 30 25 king and his 22 panthera there was nothing touched on the valves just new front orings and id have...

The king uses same valve as drs / panthera /dynamic it's a balance valve and part of it can be oring stiction id add a tad more hammer...

I've had one of the .22 3 grooves for a couple years now .... Shoots both very well. .217 to .2175 & no larger with lighter slugs 25g...

Sorry didn't read all the way before commenting

Just wondering if you having any testing done on the barrels as far as accuracy pellets and slugs ?

My Texan with a 400 gr will do what ever I want to within 50 to 75 yards what do you need 1200 fps for

I found a new stock for the FX Panthera Dynamic. What do you think about it...

Using a arrow with one yeah pretty much beats all the crossbows i think

I have two FX shrouds, there were no holes so I drilled them. The original built in air stripper breaths easier, I can see a lead...

I wanted a heavy-weight projectile pusher. Lucky for me Utah Airguns has the FX Panthera’s on special right now 🤘🏼 so I snagged a 700mm...

My recluse 357 before I put in a power kit with a 105 gr would put out raccoon easy enough a well placed 22 cal 25gr would do the trick...

That's easy enough.

Smaller shroud diameters / volume can benefit from vents in reducing muzzle turbulence, noise not so much :( Lowering noise as well...

I had clipping on ronin when barrel stiffener tensioning kit from fx was installed after pretty much trashing the ronin dfl found the...

I use vent holes in the rear of the shroud so it can use the whole shroud my thoughts are that if it's sealed off kinda airlocks and...