Back_Roads's latest activity

The old .510 TX2 valve is 3625 psi with carbon fiber bottle ...This new version is 4500 psi working valve with 300 bar carbon fiber...

I have had one since this late fall. the first one was a reject one of only 2 that they have had reported, Serpent was quick to fix the...

https://www.airgunrevisions.com/product/the-shawty-b/ I’ve already been producing these .25 barn guns and field tested for 5 years...

The newest version of the Jet2 in .25 would fit the bill on a budget. I have the Jet1 in .25 I customized, 20 fpe. I also have a 2240...

Another option is night vision binoculars, as a spotting device, and torch for the final act. There are some new budget ones out now...

Mine made it today fired it 2 times, it works, so I mounted a scope and check for leaks. I did find a bit more play in the bolt than...

Well mine may need some exploratory surgery. Mounted scope and gassed her up. Bolt is very difficult to get forward and back and in to...

Had the same thinking, wanting to make my own without having to invest thousands, thats why i made my own and Will get more to sell for...

Average of 5 trigger pulls. Travel cut down by about 70%. Still a single stage but very predictable now. 866-867-866-869-873 5 shots...

35 yards. 4 of 5 inside a pinky nail. All I've done is a new crown and lightened the trigger. I didn't clean, lap, or polish the barrel...

Or the gun could just do what it’s supposed to when people pay 2000.00 plus for it. These a bunch of other guns out there that shoot...

Thanks so much gents. I will put some pellets on paper Thursday when the brown truck O happiness arrives with my Pinty .22. This one is...

Polished the hammer where the sear engaged. Profiled the sear and polished. Both polished to 1000grit. Sear was completely flat causing...

But far as videos...nope. My face is made for audio only. I had posted some group sizes, I think... bottom line is the trigger on...

Here is a picture of the Maximus with Prod grip