Recent content by bat54action

  1. B

    FX FX King or FX Continuum 30 cal.

    I recently purchased the FX King in 30 caliber. I also have a Crown in 25 caliber. It is light, easy to manuver and easy to carry. I purchased the King for extended ranges for woodchucks. I have taken woodchucks out to 75 yards with the 25, but the 30 is really the ticked for shooting these...
  2. B

    Looking for a carbon tank regulator

    Well, I am up to 4000 PSI and all seems to be good. I will test it tomorrow morning and see if its holding air. I've never went above 4000 PSI before. Guess I just didn't want to push it. I think tomorrow I will take it up to 4500 and see what happens.
  3. B

    Looking for a carbon tank regulator

    You're correct! I didn't realize the difference, but I do now. Yes, what I am looking for is the "valve", which is the part that screws into the tank. Also, I was able to disasemble the valve in the way that you stated. I found two O rings and a teflon ring I believe, along with a seal at the...
  4. B

    Looking for a carbon tank regulator

    This is a couple pics of what I'm dealing with. The one showing the tank is basically all I need. The reason I'm having to replace it is I have a leak where I close the valve which is showing on the pic to the left. Also, what is a SCBA tank? I take it it is a scuba tank. Mine is a carbon fiber...
  5. B

    Looking for a carbon tank regulator

    It looks like I may have to invest in a new regulator for my carbon fiber tank. I cant seem to find any, and what I have found I'm not just sure if it will work on my tank. Looking for some help please. Thank you
  6. B

    Issue with my Airhog carbon tank valve

    I confirmed this morning that the thread size going into my tank is 7/8-14. I'm going to have to replace it because I am not finding a way to fix this one. I am not experienced enough to trust myself. I am posting another photo showing just where the leak is coming from. It is coming at the very...
  7. B

    Issue with my Airhog carbon tank valve

    The leak I am experiencing is coming out of the top knob which is the black shut off valve. I removed the black knob and there was what I thought a hex nut. I was thinking that underneath the nut I might find an o ring that may be the issue. When I turned the hex nut, the whole regulator started...
  8. B

    Issue with my Airhog carbon tank valve

    Here is a pic of my tank regulator
  9. B

    Issue with my Airhog carbon tank valve

    I will post pics soon. Thank you
  10. B

    Issue with my Airhog carbon tank valve

    I have had this tank since 2011. It has never been out of my house and I have always taken very good care of it. I probably haven't filled it more than 15 times in the past 13 years. I finally got me a compressor that is capable of filling the tank. I normally have been filling it up to around...
  11. B

    Aurhog tanks

    I am having issues with the valve on top of my Airhog fiber tank. I can't seem to be able to call them. Just wondering if they are still in business?
  12. B

    FX Replacement stocks for the FX King

    I am not particularly fond of the GRS stock on my new FX King. It is a beautiful stock but handeling the firearm I find a bit cumbersom. I am interested in changing it out. I am looking at the Saber Tactical, but I am not finding much other than that. Again, I may just be looking in the wrong...
  13. B

    Moderator on my FX King. (Yokozuna)

    well understood
  14. B

    Moderator on my FX King. (Yokozuna)

    I had to do the same thing. This airgun stuff is a very expensive hobby. Tank for filling cost me 700 bucks. A compressor around 700. I've only got two rifles but with scopes and all well over 5000 bucks. Maybe I didnt do my homework properly either though. I know I sent Utah airguns an extra...
  15. B

    Tripod for my FX King

    I have a Deathgrip Tripod and I use it with my FX Contiuum. I'm able to hold the gun quite securely and do well out to 100 yards. With the King though, I have to move the gripping part of the tripod up more onto the cylinder because of the gages on the left side of the rifle. I am looking for...