Bayward's latest activity

check this out: https://www.airgunnation.com/threads/how-to-cool-a-cs4-or-cs4-i-even-better-than-just-bleeding-the-air-pocket.1329008/

did not reverse the air flow but the two water outlets are now on the side as opposed to the bottom

Here is something else that my interest those doing an hour meter on the back panel. To make the cutouts in the back panel I wanted to...

That was how I guessed and filled mine. I also removed the aluminum cross under the water tank glass cap. I can now easily see the water...

I fill mine to just above the recirculation outlet. That leaves a bit of air space at the fill cap. I can still see flow through the...

If you look at my side view picture you can see two yellow dots. Those are the female half of the bullet connectors the factory uses to...

Nice work, how did you wire the analog hour meter? would love to see the nitrogen set up once complete Did you rotate the cooling fan...

My pump arrived Monday the 14th a day earlier than tracking initially showed. After reading numerous threads about first start up I...

That is a sad situation, even to give up his chickens. Hoping that we do not have any further issues. But we plan to redo the back...

My CS4-i arrived wet and also from the seller. A friend of mine who since has moved had a similar situation with his small farm. He had...

I have been using Nitrogen for going on 5 years now Starting with a GX CS2 that I fed at 5-8 psi , I now mainly use a flowgauge at...

I have a couple fittings ordered for my CS4-i. They will be here Thursday and I will try your method.

I don't know the flow rate, but the output of the CS4 is a little more than stated in the manual. I measured the power used by the CS4...

Do you know what flow rate you get at 3 PSI? Thank you for your input.

Adding an edit for one more question. How long have you been using nitrogen to feed your compressor? My reason for asking is when I was...