BBGunn's latest activity

Received the P-RIFLE today. No damage to box or rifle. Aired up and shot 10 shots with 14.3 averaging 904 fps and 21.6 fpe. Had a high...

I have a U2 .25 700 Carbon. I've tried all the popular slugs between 36gr & 44gr in my rifle. I've tried them at various reg...

I think the answer to that question depends on the person wanting to buy the airgun. If you are not mechanically inclined you may find...

Despite what you may have read, 'red dot' sights DO have parallax error. You were correct when you wrote that dot sights were designed...

The overall shape of the rifle is the same as the Epic Walnut.

I have a few bins full of Kral parts. Every now and again I find a part and it causes me to build a full gun around that single part. I...

Love it! My kind of rifle! Nice work! Would be an excellent coyote calling rifle as you don't need many shots per fill.

My .30 U2 is set at 150b. My hammer spring adjuster is sticking out the back of the block and it’s adjusted perfectly. I determine when...

Well the V3 doesn't have a balanced valve. I did minutes to tune the U2 .22 700mm via balanced valve and got a much lower spread, from...

Certainly do. I didn’t have to modify my carbon stock either. At least I don’t think I did. Too many guns. What’s interesting is my .30...

After I replied to you earlier I went and pulled the stock on my rifle. I turned the adjuster plug two full turns further out. My...

You are not tuning for efficiency with a balance valve by playing with the spring. Though it may help a little but nothing like a poppet...

I had to modify my stock to accommodate the adjuster sticking out on all three of my U2’s. If I couldn’t get the results I was looking...

So, if I'm reading what you wrote here correctly, you are saying that you have adjusted your hammer spring adjuster farther out (less...

I am on the edge of starting to experiment with a light hammer spring, or shortened hammer spring. I have had my U2 for almost...