bigHUN's latest activity

I just retired from mechanical CAD design and have my own 3d LCD printer for several years now. Along my years I have been exposed to...

It is not a sub tune. And this tune is more about a very efficient air sip and not chasing high speeds or fpe. Weekend now two cars...

Old post but I have a new tune to the public. .22x480 AP barrel, 2x08 jets, 94 bar REPR, from a 240 fill to the Reg - 125 shots ;)

This listing has been renewed

On my YH it is a Left Hand thread. You don't need any impact wrench but on the allenkey - give it a moment of inertia ;) use a mallet...

The bottom line is, picking up a good performing barrel is a pure luck. Some people keep buying and testing and buying again, and some...

This guy makes really good videos.

how good are your groups at 50 yards? your tune and form need to be able to produce 50 yard groups under 1/2” or under 1” at 100 is not...

If you want a good water-oil separator, you need to look for these mechanical filters, single or dual stage. No media in this one, will...

Hi there, you late to that party, the project was fun but when finally finished the entire group just followed down the wind. I still...

Back to OP. Regardless if compressors have auto this and that - we shall never leave it running alone. Need a quick washroom brake? shut...

The CF bottle valves (pin) does not interchange between MK1/2 and MK3/M3. I cannot remember which way forward or revers is compatible...

Lessons what I learned is, in same calibre and weight category not all slugs to pellets is better BC, or that BC number is irrelevant...

"if you have a rifle where losing zero costs you kills or scoring points..." You have a stack up tolerance problem between your parts...

Leshiy 2 https://www.edgunwest.com/store/c1/Featured_Products.html