Camaro454's latest activity

I believe the fitting threads in theTuxing end caps are both metric thread - M10x1.

We were the Tuxing reps for 3 years and provided test engineering for them. After years of suggesting they update there manuals they...

Have 032 with over 300 hrs on it. Same unit I did the original review on. Still filling tanks, only Seco 500 and water wetter. Syn film...

You can use water wetter as well found in most auto parts stores. As a side note I would not use royal purple syn film oil in your...

Thanks! Problem solved! At least for now. I removed the nut. On the back end of it (behind the little steel ball) is a valve with an...

Don't know GX-CS3 but I'd remove complete assembly by removing nut, no pressure on system, of course, then investigate what seals...

Neither good nor normal, compressor will always be working against itself. Two separate GX-CS3s, with same leak, points to common...

You most definitely have a leak. Make a soapy water solution and spray each connection. I would start with hose/deadhead and work up to...

Most realize high-speed-fan-only cooled, oil-less, waterless, multipower, high speed rectangular box compressors only last 12-18 months...

Depends on the hour meter you purchase. Here is an example off ebay. You would need your volt meter to find a switched on power source...

Given the exhorbitant retail price of $1,200 they should be sending you a prepaid shipping label. How long have you had the compressor...

Try just depressurization and let it start back up

I have the version that includes the coolant tank, pump and radiator. I have been using it for over 2 years. Fixed various leaks and...

It's a 1/4 NPT thread. Very common in the U.S. for any gauge 2" diameter or larger.

This will vary between projectiles, barrels and the tune that your platform likes best.