Corvid_hunter's latest activity

She was in Florida getting treatment for cancer which is terminal BTW. M&M flipped the bill for her to experience this. She’s also an...

With the 380mm barrel on my Crown MK2 I was shooting the 25gr JSBs around 650fps. Had 2 foxes lurking in the back yard waiting for the...

So here is where I'm at. I will try some of these out. I can make a few for guys interested in trying out this DIY thing. I will have...

Now for a test!

Here is one modification I did so seat the ejection pin securely. It puts a little dimple in the far wall of the casting and the pin...

These are the GMI die set parts for a .218 slug. They are all very hard and nicely made. I've owned my own machine shop for 30 years...

I wanted to give an up on this project. Both Coxworkshop and I were interested in swagging and wanted something we and others with some...

If I had to guess, I would say a Red Wolf with a tube in a chassis. But they do say a new platform, so I guessed wrong.

What kind of ammo have you been using?

I read somewhere that treadmill belt lubricant is 100% silicone oil. Can't vouch for that though.

If you want a good water-oil separator, you need to look for these mechanical filters, single or dual stage. No media in this one, will...

Just out of curiosity, is the rifle relatively new or is it old stock?

Congratulations on your new rifle. It should be able to achieve your desired velocity at around 150 bar I would guess. My Ghost .25cal...

I like the turkey dot reticle on the Hawke Vantage IR 1-4x20.

It will come with a box of that new ammo they have…