Diehard50248's latest activity

This is a 6” eccentric wheel made specifically for the S-Tac by Eric Sanders of Scope Werks. The S-tac presents some design challenges...

might find something here https://jdscustomdesign.com/scope-wheels

This may help & it is a pic of my HW95L .22 with a Hawke 4-16 x 44 mm Airmax compact mounted with Hawke tactical 2 piece medium rings...

Bending the wheel worked! The scope and the rifle are now aligned, level, and the wheel doesn’t rub. My method was a bit unorthodox but...

I forgot to mention the wheel already has an o-ring spacer to offset the wheel from the scope’s parallax dial. I’m liking the idea of...

Spacer like said above or new scope wheel. Talk to the maker about giving you enough space to clear the rifle. When Scopewerks made one...

It looks from the photo that you only need to trim the width of the wheel by a very small amount to clear. As smok says scope werks gave...

The thin, circular webs that attach the outer ring to the hub look like they could be bent/tweaked/moved easily. Set it up in an arbor...

Having the scope off vertical is definitely a no-go for me. I have one where the problem came about from a loading lever on the left...

Given grub screws holding wheel on could come out on knob a bit & still hold on ... Spacer within the cup that slides over knob moving...

Different scope, different wheel, similar issue. Wheel scuffed against shoulder of rings. With wheel off scope and fully supporting...

I recently purchased a very nice TX200 MkIII with a Sightron S-TAC 4-20x50 scope from a fellow AGN member. The rifle works flawlessly...

First let me thank AGR for pointing me to the dye method and giving me pointers on how to use it. I was initial ally going to stain it...

This lovely 31" rifle is a compact beast. Gets about 50-60 shots from 300b to 150b. *EDIT* The Statement above is old, I have recently...