elh0102's latest activity

I'm glad to see Daystate developing a new non-electronic gun on a full-length rifle platform. I'm especially interested in the "eight...

Don't worry about the skirt, 3,000 psi makes'em all the same! If you want to measure anything it should be the head. But, if you are...

I know. On two occasions I have replaced external reg O rings and had immediate leaks at the vent hole. In one case, an O ring was...

It's probably a bad outer O ring on the reg. I had that issue with a Huma reg on my Royale. And yes, you can remove the bottle under...

The Crown is a liner system and the Red Wolf is a real barrel, big difference. I have a RAW also, and it's a tank, great rifle. The...

Obviously, personal preference will be your deciding factor. I would choose anything made by Air Arms over anything made by FX. But...

I like Sightron scopes, and the S-TAC 3-16X might work well for your needs.

Something to keep in mind, there can be a big difference between shots per fill, and shots on reg. At some point after shooting down to...

If you are getting 70 shots on reg, that's incredible! I think my rifle came with the reg set around 150-160 and I haven't changed it.

I think that your rifle is tuned pretty much in its sweet spot now. I have one also and it's a favorite. But, it is not a design that...

In my experience, a good barrel shooting good pellets should need cleaning only rarely. I believe the best strategy is to clean only...

If history teaches, my guess is that when the dust settles, we will see a tariff effect of around 10%. Without government interference...

It's curious that your issue was when using one specific magazine. Maybe it was just coincidence, and I hope you've found your problem...

The Veteran magazine should require no break in. It is essentially a revolving single shot tray, no springs. I've never seen an increase...

I've never really seen the need for one. You can easily get close enough to be on the paper. Then make one large adjustment to get...