EPG's latest activity

I have been buying on Aliexpress for 10+years and hundreds of orders. From Aliexpress I bought many airgun related items: -scopes and...

Holy Smokes Tommy ! GREAT SHOOTING with that RAW .177 !!

Mushroom gave some great real world examples - yes, comparing fpe to fpe the larger caliber is more efficient with air usage. As far as...

I had dropped my .22 DS Huntsman Regal to 20.5 ft/lbs via replacing the factory hammer spring with a 1.5mm wire gauge x 60mm length...

Nice shooting Greg ! Holy Smokes - 66 shots to shoot a Masters Card! EPG would never take more than 25 - and those 5 would be before I...

I have one to submit for the leader board. 198 13X with my P35-22 shooting H&N Baracuda Match at about 810 fps. I was using my Athlon...

Bob gave you an excellent tuning methodology. I’ll offer that the Weihrauch factory reg pressure for 12 ft/lb HW100 and HW110s...

Hi Matthias, I have two P1s and .177, .22LR, .25LR and .30 barrels for them. i have also made a number of custom hammer springs for...

Well, I’ve got a bunch of tube rifles that I may try a regulator in - Daystates and Reximex, etc. The rifle I’m most considering...

Too many: If you have one (or more than one) that you have not shot in the last 365 days.

Thread updated - see fill time above for filling new 3L tank from 0 to 4,650 psi (320 bar)

Thanks nervoustrig, Ok, so considering avg pressure during shot cycle is lower with the regulator installed due to plenum volume (vs...

Thanks Vetmx, I've heard this before regarding porting, hammer weight and hammer spring... Assume that my example is a nice gentle...

Looking for some input from those experienced with adding regulators to previously unregulated rifles... Scenerio: Unregulated rifle...

This adapter might help: https://huma-air.com/moderator-adaptor-m14x1-25-female-to-1-2unf-20-male/ -Ed