Recent content by Foxbow

FX hybrids have by far the best expansion. I've retrieved several from actual targets and they mushroom out perfectly dumping all their energy.

They work fine without a slug mag.

I have found FX hybrids to be one of the most precise in my leshiy in both .22 and .25. Don't know about .30

There is actually a method for regulating the indexing, but it requires a bit of advanced tinkering. By sealing the opening in the forward plug located beneath the brass shuttle, you can control the air returning to the cycling mechanism. This opening is approximately 2mm in size; I inserted a...

It took me a few days to test this out, but I finally got around to it, and it definitely seems to have reduced the recoil I experience from the gun. It appears to be far less hold-sensitive now. When I review the shots in slow motion, the scope drift seems considerably reduced and moves more...

.25 caliber, 34 grains at about 850 fps from 350mm barrel. I've checked for clipping but the bucking is even worse withouth the moderator. It kicks twice as far to the left when I remove it also the point of impact is way further to the left. The shots in the video are taking from a stable non...

I’ve been experiencing issues with my Leshiy for almost a year now. I’ve replaced some worn parts in the hinge mechanism that were causing sloppiness. However, my Leshiy still isn’t shooting straight. The latest problem I’m dealing with is an unacceptable amount of horizontal bucking...

FX Hybrid works good in my 350mm Alfa barrel.

Thank you. I've seen the post, but when I buy a €120 piece of plastic, I do not expect it to be warped and maybe you won't be able to return it once you have sanded it down and still have issues with it :cautious:

Yes, that screw head looks fine.

The mag teeth are still black and look perfect. The magazine is as good as new. It's been spraying like this since the beginning. If i hold the mag against some light, I see that the plate does not sit flush with the mag face. If that is part of the problem then I find that absolutely ridiculous...

I won't bother you with the amount of hair-pulling it took to get some accuracy from my .25 setup. But I did find out that my gun can actually shoot straight. Check out the picture below, two groups at 30m, the top group is actually a good group i get when shooting from the magazine. It mostly...

Well, the problem is, the old front plug used to have a steel ball underneath and the hole was one mm narrower. But the newer plug seems to have this other part, no idea what it is. But I used a piece of o ring and it works fine as well.

Yep, Already came up with that myself and it's holding pressure :) Thanks.

Does anyone know if i can replace part 31 LSA242223 with something generic from the hardware store? I currently do not have the original part so cannot see what kind of material is.