Gambler's latest activity

Nah, I can put in a mag and shoot normalt, except for the hard "final stage" og the lever

Hi. When I was shooting my drs today i noticed that my barrel had moved 1-2mm forward (the brass that sticks out to guide magazine was...

Do they have a webshop? :)

I dont think the angle has anything to do with it since the inlet port is also angled to match the valve. But when I upgraded my .177 to...

On my drs the fps stoped at around 120-125bar with stock 10g hammer, I bought a huma tungsten (24g) and grinded it down to 18g and that...

Yeah ive seen it, but 700 are still in presale :/

I grinded the tungsten hammer down to 18g and that made it possible for me to push 33gr slugs at 960, I could go higher but the...

Is the overall CC also increasing? I have never been good at Math, but 20bar extra = 28% more volume?

And just remember when you take the power wheel there is 2 small steelballs there that are easy to loose

The first pcp i bought was an crown mk2, I put a slug power kit in it and with 145bar i shot 33gr slugs around 960fps. This is 155m

Have you tried to adjust the internal hammer spring? Need to take the stock off and use a 2?mm umbraco to tighten it up

They shoot lighter pellets with 20fps less in the new tactical, but yeah, something new inside probably.

Look into the Form stocks. So nice. https://www.pyramydair.com/product/form-fx-drs-carro-stock-right-walnut?a=20369

I would more like a GRS stock for the drs, like king and crown

The hammer adjustment is most likely on same place as regular drs, so you will have to take the stock of to get to it.