Hobbyman2007's latest activity
Hobbyman2007 replied to the thread Niksan Escalade Aluminum Bottles.I would say that the gun itself was mislabelled at 250bar rather than the 200 bar that it has stamped on the bottles. Do the bottles...- Hobbyman2007 reacted to Motorhead's post in the thread RTI ❓ Recommendations for a Low Power .30cal Gun? with
Like. Lets do a look at the requirements to do this and have a low ES while operating low noise ? Integrity of the valve and air path needs to... - Hobbyman2007 reacted to nervoustrig's post in the thread How many people have more than one PCP? with Like.
- Hobbyman2007 reacted to EPG's post in the thread HW/Weihrauch Adjusting HW100 for lower velocity with Like. Bob gave you an excellent tuning methodology. I’ll offer that the Weihrauch factory reg pressure for 12 ft/lb HW100 and HW110s...
- Hobbyman2007 reacted to bchannell's post in the thread HW/Weihrauch Adjusting HW100 for lower velocity with Like. I sold you the reg stuff and have tuned a few HW100s, grrrrrreat gun! In 177, I'd turn the hammer all the way out, and set the reg to...
- I found that out with the HF lathe, after the QCTP and other associated gear, I was already in as much as the lathe itself...haha.
- Hobbyman2007 replied to the thread Mini Lathe for Small Parts?.Just when you thought airguns were expensive. Now we’re talking machinist tooling. I’ve been running a 9 x 20 chinesium rebranded HF for...
- Hobbyman2007 reacted to ChefSparrowRagazzi's post in the thread Review of Tony at Talon Airguns - And Airgun Technologies. Revised with Wow. Timeline: November 29, 2024. I called and spoke with Tony about the Uragan 2 King. I was informed that he did have the gun, so at...
- I bought a used panthera, that ended up needing some work. After calling and talking to UA, I mailed it to them. In less than 2 weeks...
- Hobbyman2007 replied to the thread EDgun EdGun Leshi 2 pressure question.I would fill to 250 if I were you. Maxing out the pressure only leads to failed regulators. I’ve been filling mine that way for the last...
- Hobbyman2007 replied to the thread Theoben Rapid MK2 mods.Unfortunately, Martin won’t ship to canukistan. I ordered from rapidairworx. I wouldn’t be able to use the plenum as that’s where my...
- Wonderful mods! You'll enjoy the v-block once you get it! Martin also manufactures a mini plenum extension for the front port under the...
- Figured rather than hijack other threads not to mention I just wanted to share my “end of winter project” . Rifle started out as a .25...
- Hobbyman2007 replied to the thread RAW Rapid My new rifle based on your recommendations.The rapid I have is pellets only. They called it the fast flow valve in the location where the regulator goes. I do know it makes big...
- Hobbyman2007 replied to the thread First Look At The DNT ThermNight TNC335R & TNC635R.I just received the 335 and so far so good. One thing I’m not really sure about is when switching from one rifle to the next. There are...
