HogKiller's latest activity

You're preaching to the Choir around here! lol

Yes, unless of course you have a 2nd with parallax. Then it needs the fine focus the parallax adjustment allows. I think I may have a...

I read through the answers, I think you need this, If you shoot a 16gr pellet at 850fps you get 25FPE. Go faster more FPE, go heavier...

Well I started off with a break barrel, cheap, turned out the barrel was bent so I straightened it, have it shooting fairly well but not...

If you ask questions here you find the tidbits, you also have to not be afraid to screw something up, hopefully not beyond repair. I've...

Todays pro tip, to H will the kits, just buy them by the bag, that way if you mess up you aren't short one and if they are N90's you...

It is a constant chore if you own a lot of PCP's ... Yes it is :rolleyes: It really is little different than many hobbies or sports, in...

You have to do both, both need a slight dome. I helped a guy with his M3, the delrin was concave, luckily I had some spares laying...

Sorry, I’m confused. I was aware the delrin deforms some but are you saying the brass adjustment screw is not the problem and causes the...

To your point on Talcs, a few million of us and our mothers breathed in that stuff for quite a few months, personally I'm still good to...

And this is where you do a show and tell, heavy on the show. Personally I'm not unhappy with my Mavericks, I'm running 8 - 10 oz...

That's why you do it by hand. It's the Delrin that wears a hole, depression BUT...honeslty I'm not sure it matters, just seals better...

Simply using a leather strop with some green diamond embedded works wonders on the brass and the Deron, then finish on a plain strop

There ain't nothing soft about air soft, they tear aluminum cans to shreds.

Utah lists 1:16 for 0.22 thru 0.30