JackHughs's latest activity
JackHughs replied to the thread How to refill grease pot on GX-CS4 Compressor?.I had about 2 hours on my CS4 when I read post warning of large air bubbles in the grease. I then opened the grease cap and found a...- JackHughs replied to the thread How to refill grease pot on GX-CS4 Compressor?.As I recall, Gx advises each user of a CS4 to pay attention to the "speed" at which the compressor operates. My CS4 makes a distinct...
- JackHughs replied to the thread FX fx pantera leak.If you have the time, please report back on UA's findings. Thanks JackHughs
- JackHughs reacted to NoLimits's post in the thread Microscope pictures of FX 30 Cal 50.2 Grain Pellet and JSB Hades Diabolo 30 Cal 44.75 Grain Pellet with
Like. Looking at a pellet with a microscope is good. But you can't see the essentials. The pellet has to rotate so that you can recognize... - Обычный маркер.
- Got the same one from Bagnall and Kirkwood and one from 910 Airguns, definitely like the one from B&K. You could make one in a pinch...
- JackHughs replied to the thread FX Panthera Valve Rod Leak.Well, my question was rhetorical, but I see your point and wholeheartedly agree. JackHughs
- JackHughs replied to the thread FX fx pantera leak.Yes. X-2 could be the source of your leak. If you remove the chassis, the valve holder (X-1) is visible. A leak at x-1 is easy to...
- JackHughs replied to the thread FX Panthera Valve Rod Leak.That's ugly! I've ordered three x-2's, three B-3's, one x-5, and one x-6. The valve seat was not removed because I did not notice any...
- JackHughs replied to the thread FX Panthera Valve Rod Leak.I've read about the costs of airgun shooting in Russia. Thank you for your comment. JackHughs
- JackHughs replied to the thread FX fx pantera leak.My one-month old .22 700 cm Panthera developed a serious leak through the Valve Holder. This is Part X1-1 on the FX Panthera...
- JackHughs reacted to grackleblast's post in the thread My regulator gauges failed and oil is everywhere with Like. They are filled with glycerin......................and it is not necessary . Liquid filled gauges are used on running equipment and the...
- JackHughs reacted to Ballisticboy's post in the thread The Mechanics of the Vertical Wind Effect with Like. I haven't done one on the gyroscopic stability of slugs/bullets, but basically the mechanics are the same as pellets, but the gyroscopic...
- Id just do the valve rod and oring
- JackHughs replied to the thread FX Panthera Valve Rod Leak.Thanks, I'm going to order parts shortly. Is your advice to replace the complete valve assembly or just the valve rod and o-ring? By...