M777's latest activity

Love seeing these low fpe clean kills, great shot!

Took this one at 20 yards off hand with the challenger with the rws r10 wadcutters not getting in my garden ! 😂

Tore into the check valve earlier and replaced the o ring. 99% sure it’s the fill valve in the rifle now.

In this hobby using something then setting it aside for an extended period can cause problems. Compressed air, without sufficient...

I will try the silicon oil soak as a last resort before tearing into it, thanks. Funny thing is that this thing is practically brand...

Update 2: Good news I found my compressor that was missing during my move. Bad news, the power supply blew (audible pop inside the...

Update: Was able to get to the check valve. Cleaned it out and installed a new silicon greased o ring, re assembled and same issue. Also...

Was able to get to it thanks!

I would say it gets stuck at around the half way mark. Yes, exactly, pressure builds up in the line and can’t pump any further than...

When you can’t pump it is the handle/pump stuck in the fully up position? If so I am assuming you feel pressure inside the pump pushing...

Yes, full body weight (170 ish lbs). Im guessing the pump is the issue also. Will likely look into it tomorrow. Thanks!

I will try that, thanks!

@M777, when you say impossible, what does that mean? Full body weight on the pump won’t crack the valve in the Atomic? When I ran into a...

If pump is acting up, clean check valve. Coby, of Topa Manufacturing Company, has Chinese handpump tear-down videos on YouTube that...

I will try that tomorrow in the morning thanks. Trying to think everything through, but it seems like it just stalls as soon as the...