Mycapt65's latest activity

I have been trying to work up the nerve to do this. I like diopter sights but the current comb height on HW springers doesn't fly with me.

This isn't far off. But its obviously biased based on wording. I'm assuming Grok is an AI search engine. You have to be careful with AI...

I have an R7 with a fresh ARH kit/guides and Vortek seal that shoots right around 7#. I would call the shot cycle "rather snappy". My...

Depending on pellet they're 7-7.5 fpe from the factory now. Years ago they were a little tamer. Out of the box they're seldom smooth...

That's how I wound up with my two. I kept flip flopping between the Williams peeps and my 2-7x32 Airmax. I put the Airmax on my second...

Thank you so much. I know my talent limitations. I shouldn't be allowed to touch wood. I took it down to where it's comfortable. I was...

I really need to buy a second 30. The little Hawke and the peeps have been swapped too many times. Good to hear Ron, planned weight...

Looks great, glad it turned out so well. Well on your way to being a custom stock maker / modifier. Should be a very popular...

Still 6'4"205lbs. I was 250 in July

Firstly, thank you Maxtrouble for gifting me a Hw30 stock. Now I have a stock that I can "fix" the comb on. My favoite Hw30 is my...

This listing has been renewed

I put a Vortek steel kit in mine after about 5k shots. The factory spring developed a big curve and got real crunchy. I did not put a...

Yes it needs to be fairly straight and round. I made a gage .002 smaller than the bore diameter and it would go the whole way without...

Believe it or not, it might be possible with a perfect comp tube and a good 20 or 22barrel. My wife's 177 Hw30 is an aberration it makes...

Perhaps not enough torque. The Chinese mounts are usually made of poor materials and they'll strip before you get them to tight enough...