Pysiths's latest activity

Here is a YouTube link that might help. You got a bad o-ring on the valve housing

Between the 4 Impact and Urgana king. My original FX MK2, updated to a 500mm barrel, is still my go-to airgun.

What tranfer port are you using, slug or pellet marked on the barrel assembly. Check your probe and projectile for alignment \ cleance...

The goal is to get the smallest burst of high pressure air, to achieve the best velocity and accuracy. The tungsten hammer weight...

It's a yes and no anwser. It depends on the adjustability needed for mounting your optic. Info below was taken from their website...

Absolutely !

Here's some details on the Micro Strike. Looks feature rich. https://www.airventuri.com/av/featured-products/microstrike/

Sounds like you need a heavier hammer and make sure the valve adjuster is opened up all the way it will open almost 2 turns past 4th line

Try lining the inner tube with 3M Scotch-Brite pads to quiet down the OEM moderator.

I found it.

I might have an extra 50mm Riton sunshade that you can have, just pay for shipment. I'll check later today to see if it is the right one.

eagle vision

I have a couple of the huma test gauges to give me an idea how close the other gauges are. If you get these be careful which you choose...