rc4fun's latest activity

1/2” 5-shot groups at 30 with H&N 14.66gr FTT 5.54.

Ha I made it in before the mods lock this ya 👍. It must be realized that the majority of this tariff talk is just that. It’s a weapon...

Initially, the post office was no longer going to be shipping anything from china, but I guess they decided to change your mind at the...

@AJ_Roberts & @zx10wall what kind of groups can I expect with a regulated Gk1V3? Rested at 12 & 30 yd. Wad cutters at 12yd and whatever...

Huma installed and set at 125 bar: Created: 12/17/24 06:05 AM Description: Huben V3+ GK1 .22 Pistol Notes 1: 03029 Notes 2: 280 bar...

Valve rod at that point doesn’t have friction on any other parts. Shouldn't interfere with the spring. Are you sure you got the correct...

Agree seems like hammer/valve thing or a blockage in the transfer port or probe. Are you running the stock probe ?

I am shooting an M3 power block. But yes stock probe in .22.

I remember when $200 got twice this many pellets. Not that long ago... From the Pellet Shop fast shipping and UPS didn't have them long...

It could be the gauge is bad and the reg is not what you think it is. Take the tank off and swap gauges to test. Did you ever change...

Did you by chance screw the valve adjuster all the way in...

If you have the proper one-way valves and pressure relief at the gun end you can leave the filters pressurized all the time! I check...

Could be a lot of things. Did you check the C1 adjustment? Dirty, broken hammer or spring, valve rod bent or really dirty over lubed...

dnye1986 The slug isn't pushed completely into the liner, only enough so that it sticks without movement. A slight push with the thumb...

Yes! A well made shroud does wonders. And then if you need more add a moderatetor.