rdpjr6504's latest activity

Hopefully Umarex will sell parts but can 1 be made from Delrin or peek as it looks to be made of plastic ?

Yes most of the parts are the same. The barrels are different and the charging lever is on the opposite side. I have converted mine to a...

Both grub screws hold the tank adapter to the breech and must be removed in order to access to valve poppet.

BeeHavior did you get it straightened out ?

Not bar but MPA

Received my rifle today empty of air. Aired up to 3600 psi- looks like reg at 13.5 bar. Power wheel set at lowest setting . Shoots 14.3...

There looks like a grub screw between trigger and fill port. Remove that one also

Looking at your images did you remove 2 grub screws- 1 in front of gage and 1 behind fill probe ?

After removing fill probe- gage and gage fitting then grub screws you twist tube fitting and pull out on it. There should be another...

Have you pulled the valve pin (poppet) to inspect it ? Sounds to me that is your issue with the rifle. I have the .45 & .50 and if...

Did you try to air it up with the rifle cocked first ?

Rob_in_NC thank you for all you do.

thammer I hope your comes first so we can see what you can make out of it.

Received FED EX shipping label today. No delivery date yet.

How about an image of it installed to show the difference ?