Recent content by Regulator

Take the Huma reg apart (Assuming warranty is out) and inspect it. Huma rebuild kits for their regulators are readily available and not expensive.

I bought some of these O-rings for the breach a while back they are fantastic, Also when I store the gun I made a little rubber block that I wedgr between the cocking lever and the barrel just barley enough to keep pressure off of the breech seals.

I'm looking for a replacement aftermarket piston seal for the JTS portable compressor, does anyone know the exact size needed for this compressor and recommend a place to purchase from? I know I could try to contact JTS but I really don't want to deal with them if I don't have to.

All right guys thanks for the feedback I was just curious.

More power for bigger varmints out of a accurate rifle.

I have the vortex spring kit in my Mark 3 and I'm getting about 660-ish feet per second with 16gr pellets... is there anybody else that offers a kit that can get me up around 800 + ft per second? Anybody out there with any tips or tricks or I can up the foot pounds in this baby?

I did. I put about 500 pellets so far through the gun with the new regulator and it's been solid, no creep. I have it (Reg) set at 1800 PSI and I fill the gun to 3200 PSI, I get about 40 very accurate shots @ 860/870 FPS. Happy so far:)

I've only owned the TX200 in .22 like others have said here I don't think you could go wrong with either one based on their long-standing reputations. I have the vortex spring kit in it and it's super easy to tear down and work on. I mainly use Air Arms 16 grain pellets averaging about 670 ft...

I'm not trying to discourage anyone from buying from jts, I'm happy to hear that a lot of you have been pleased with your purchase and not experiencing issues. My personal experience was a little bit disappointing but again I'm not trying to discourage anyone giving jts air guns a chance. I did...

Knowing what I know now if I could go back and do it over again I think I would go with air Venturi, I should have paid the extra money and just got the bottle version of it and picked up a compressor off of Amazon.

Yeah sorry I need to learn to shorten up my posts I tend to ramble on quite a bit😅

Took the max out today and put about 100 shots through it, specifically wanting to test out the jts 18.13 grain again, they shot just okay at 25 yards, I wouldn't have any problem taking out birds or maybe even squirrels within that range but anything past that I'm sticking with the jsbs, be...

I have a couple tins left of the jts pellets I have yet to test them since I swapped out the regulator maybe that will make a difference. I may be wrong but it seems like they have a harder alloy makeup than the jsbs that might have something to do with it I don't know

it also likes the h&n 18.59 grain Hunter extremes. And for really good accuracy out the 20/25 yards I would have no problem hunting with the Crossman hollow points as well ... seems to like them. With this new regulator I'm going to have to go back retest some pellets. It doesn't seem to be...