Sicumj's latest activity

Utah add states 1 in 24 twist for the 22 in standard STX and 1 in 16 on the heavy. No listing at all for the 177. My 177 heavy has 1...

Utah. STX 177 700mm Heavy.. Got 2 of them. :)

A friend of mine and a member here John had an idea to shoot slugs, by modifying his Avenger. We purchased a STX 700 mm FX barrel in...

I use to rat hunt at my father in laws pig farm. No night vision then I used a red light attached to a hat and a FWB 124 with aperture...

Another Kral... 😆

Zelcom 30.5 supressed

If I remember correctly, with the factory valve and no other mods, just using my pcp conversion and a 2000psi fill, you would get 20+...

I wouldn't worry about it. I usually space my rear ring with 2-3 pop can spacers or use Burris Signature Zee rings. I have 4 AEA...

Just a couple... SuperGrade Model A Consecutively numbered Benjamin Centennials in .22 & .177 Cal. Benjamin 342 Prototype.

I had a Savage stock that was hollow. I cut two graphite shafts from arrows placed them in center and taped them in place looking like...

The tool is a must! Don't bother making your own as I had planned. Buying it is totally worth it.

I've used these guys for years. You also will need a valve tool. https://www.bakerairguns.com/product/benjamin-310-seal-kits/...

Quickest way remove the shroud. Take a pair of needle noise vise grips and clamp the rod that ties the bolt to the piston with medium...

Yes I have mine adjusted out for a stronger cycle for cold weather. You can speed up or slow down the cycle with adjusting the drum...