SpindleB's latest activity

How long did you all wait before you disassembled your first air gun? How much did you know about the mechanicals? Did you have it...

You could go with the shorter fatter bottles. Alsafe has a 0.6L 75mm diameter and only 235mm long, around 8.5". Bit pricy on AliExpress...

I have a Raw from Martin and a FX 400 Royale..keeping both

I'd start with the Talon or Condor before the Texan. Unless you are planning to hunt you dont need a Texan. If you are then you need to...

It is simple, do not exceed the safety limits of the equipment. Guns, bottles, compressors all have their maximum defined. There is no...

No, he is enthusiastic about the process. There is nothing wrong with that. My question is, where does he get the experience you say he...

Possible, but still requires some exceptional circumstances. I keep seeing a lot of maybe rather than definite. Unsafe discharge being...

Wasn't the tube but the tube mount on the stock that was the issue. Only about 1/4 inch thick. Too much leverage from the tube and...

I've not heard of any modern CF or Aluminum bottle exploding unless placed under high duress. Failure mode is cracking at a weak spot...

I dunno, for my higher power .30 I found the STO Sarrissa and the Huma Air MOD50 to be the most effective. I've only used the Sumo from...

Several pellet shotguns. Gamo Viper break barrel shotgun. Then there is the AEA Megalodon PCP shotgun...

I found these guys on Ebay when my Avenge-X magazines were causing jams (they were used). I ordered a pair (two for 29) and they arrived...

Notos Dream TK and the Dream Universal are the same length, 6 inches/15 CM. Once screwed in adds 5 inches to overall length. The bottle...

Yes it will work with stock moderator

Oh emm gee!