SpiralGroove's latest activity
SpiralGroove reacted to Silver Ace's post in the thread Tuning Springer Bore and strokes. with
Like. That’s the beauty of a properly set up spring piston airgun. Springs, pistons, levers, properly applied greases, and correctly fitting...- 77 vs 95.....basically, a pellet gains the majority of its velocity while it and the piston are moving in the same direction. In the...
- SpiralGroove reacted to woogie_man's post in the thread RAW Rapid HM1000x detailed inspection with Like. My 22 with a few upgrades will shoot a 36gr homemade slug at around 930 fps with great accuracy at 100 yards. Really need to get her...
-
- SpiralGroove replied to the thread Tuning Springer Bore and strokes..Yeah, I never thought about it in detail, but completely dissimilar designs create differences in air flow efficiency. The increase in...
- SpiralGroove replied to the thread Tuning Springer Bore and strokes..Hey Ron, good information 🎯. Given MY tuning experiences, what surprises me in tuning the (26mm) HW77 vs. HW95 with the same spring...
- SpiralGroove reacted to A.G.R's post in the thread HW/Weihrauch Custom Stocks UK - HW30!!!! with Like. I’ve got a Hw 30/R7 pattern .. I won’t do work for their cost. I don’t know how they make $ doing it.. a cheap walnut blank is gonna...
- SpiralGroove replied to the thread Daystate Daystate Revere .177 regulated tuning.Yeah, you need to check the regulators set-point. Depending on barrel length, .177 requires between 110/125 bar. I can’t imagine any...
- 970 is really fast for pellets. I've seen them love that speed but also have seen groups significantly decrease with lower speed. If you...
- SpiralGroove replied to the thread RAW Rapid Sekhmet gauge for HM1000x - Dimensional issue!.Hey Bhaur, Have you successfully gone to slugs on your RAW’s or are you sticking to pellet? Kirk
- SpiralGroove reacted to mubhaur's post in the thread RAW Rapid Sekhmet gauge for HM1000x - Dimensional issue! with Like. I have installed a 25mm Sekhmet gauge on my friend's RAW. I just have to install a thicker O ring and everything is fine since then...
- SpiralGroove replied to the thread RAW Rapid Sekhmet gauge for HM1000x - Dimensional issue!.No the Sekhmet gauge is threaded so that when it’s screwed in snugly (by hand) it faces forward on the v block perfectly. The new...
- SpiralGroove replied to the thread RAW Rapid Sekhmet gauge for HM1000x - Dimensional issue!.Had an old service kit from Martin with spare gauge O-ring - part 805052. Likely 90 durometer as it needs to keep it‘s shape upon...
- SpiralGroove replied to the thread RAW Rapid Sekhmet gauge for HM1000x - Dimensional issue!.Hey Guys, Just installed the Sekhmet Pro in one of my RAW HM1000x … using the OEM gauges O-ring. It leaks, hopefully I have a new spare...
- SpiralGroove reacted to Pellets&Pistons-(Razor62)'s post in the thread FWB Paint Stripper recommedations with Like. I used to have a local firearm restoration business. I did a lot of stock work as well as hot salts bluing. I'd use ordinary, full...