student's latest activity

@marflow 777 , Thank you for showing the photos of your tapered wedge jig and using a deep well socket to push the seals over the...

thank you both so much. i was able to install to install both seal with minimal effort employing your technique. I'm worn now. I can...

that information helps a lot. I'll see if i can borrow some clamps.

well i made one out of a Delrin rod and at the time of the picture it decided to hide i would take the Delrin and use 3 glue dots to...

thank you both so very much.....iIam reviewing the photos and reading the attachment to try and absorb as much as I can...then I will...

@student , check out this thread for help with these tricky pistols...

my friend you are in trouble and i hate to say that the blue in my picture will be the red in your hand and you can see it has lips the...

Rebuilding/resealing a Diana 6/Beeman 6 break-barrel air pistol. I received 2 new seals. I don't have old seals to reference as they...

i had the same thing happen one pump and several firing why i have no idea the only change was using a 006 valve stem Oring where a 005...

Welcome!!

thank you for taking the time to do this. I had intended to purchase the new ball shaped valve type, however from your experience it...

Putting the ilder original valve in it was the fix.

The gun came with these parts, so I changed the valve for a new one that was still in the bag. The new one was the same as the one in...