subscriber's latest activity
- Ssubscriber replied to the thread Huben Ring shaped indentations inside gk1 barrel.If the bulges can be seen or measured on the outside, they do look like what happens when a slug is stuck and another slams into it. If...
- Ssubscriber reacted to Airgun-hobbyist's post in the thread Huben Ring shaped indentations inside gk1 barrel with
Like. Those appear to be bulges, based on the pictures. The rifling ramps up into the bulge and then back down to strait wall sides. I've seen... - Ssubscriber reacted to elh0102's post in the thread Bore Sighter that works with these/any airguns?? with Like. I've never really seen the need for one. You can easily get close enough to be on the paper. Then make one large adjustment to get...
- Ssubscriber reacted to Vana2's post in the thread Air Arms would like to know - Do you remember your first air rifle? with Like. A .177 Slavia 618 break barrel was my first "real" rifle. Bought it back in the 60's, and a $10 bill was enough for the rifle, several...
- Ssubscriber replied to the thread Air Arms would like to know - Do you remember your first air rifle?.Slavia 620 bought new in 1974.
- Ssubscriber replied to the thread Bore Sighter that works with these/any airguns??.Shoot 3 to 5 shots from 10 feet to see if the cluster of holes in the target are about the slight height below the line of sight. As in...
- Ssubscriber replied to the thread shortening the barrel on a choked break barrel and accuracy.https://www.pomona-airguns.com/ Pahrump, Nevada (775) 505-3840
- Ssubscriber replied to the thread shortening the barrel on a choked break barrel and accuracy.On the GTA forum a few people have cut and re-choked their barrels. Some use a pipe cutter with the blade rollers replaced by smooth...
- Ssubscriber reacted to Firewalker's post in the thread Notos aftermarket moderator options.... with Like. That looks SO good on your gun!
- SIndeed they will rise again. Pancake? 🤪
- Ssubscriber replied to the thread POLISH AN LW POLYGONAL BARREL?.They might want to know where and how it has been stored in the interim? I would want to know if they at least had a layer of corrosion...
- Ssubscriber replied to the thread POLISH AN LW POLYGONAL BARREL?.For anyone that claims those stains don't include pitting, explain this missing steel at the edge of this land:
- SFist of all, I know that there are plenty of good aftermarket Notos Magazines (Carm, Maple, etc.). Partly I just like the challenge and...
- Ssubscriber replied to the thread POLISH AN LW POLYGONAL BARREL?.The last image, taken at more of an angle looks the most like pitting with some depth to it. Yes, there appears to be chemical deposits...
- SSo I finally got around to polishing the .30 cal CZ barrel on my Uragan 2. Scoped it after I was done, and I'm horrified at the bullpoop...
