Ta-Ta Toothie's latest activity
Ta-Ta Toothie replied to the thread Which YouTubers give negative reviews?..000000000001, boy, that's pretty tight 🤣- Ta-Ta Toothie replied to the thread FX fx pantera leak.There is also vent holes on the plenum tube that can be checked if you hadn't already noticed. If you checked everything else, it can't...
- behind the pressure gauges there is a small hole, I use a cotton bud soaked in wd40, and I place it on the hole, if it makes bubbles it...
- Ta-Ta Toothie reacted to Gevtron's post in the thread How to refill grease pot on GX-CS4 Compressor? with
Like. Thanks man. Appreciate your advice. I just went ahead and ordered some. Do I fill the grease pot all the way to the edge with the top... - Ta-Ta Toothie replied to the thread How to refill grease pot on GX-CS4 Compressor?.Correct, but just leave a little room for the diaphram. So maybe leave about 1/8" recessed back.
- Ta-Ta Toothie replied to the thread How to refill grease pot on GX-CS4 Compressor?.
- Ta-Ta Toothie replied to the thread How to refill grease pot on GX-CS4 Compressor?.Don't use that. GX says food based HP grease. I ended up getting this. A little pricey, but I have enough for both my compressors. NGLI #0
- Ta-Ta Toothie replied to the thread How to refill grease pot on GX-CS4 Compressor?.And even though you cleared out the pot, the piston assembly etc still has the factory grease in it.
- Ta-Ta Toothie reacted to BrazosbyNemo's post in the thread How to refill grease pot on GX-CS4 Compressor? with Like. Don’t use Superlube yet. Let some others chime in. I am fairly certain it needs to be an HP food grade grease but it’s been a while...
- Ta-Ta Toothie replied to the thread How to refill grease pot on GX-CS4 Compressor?.If the compressor is brand new, don't add grease or turn the knob until the recommend time. And I wouldn’t mix 2 different types of grease.
- Ta-Ta Toothie replied to the thread Help me understand slugs better.It's just false information. It will scrub speed and will agree to that.
- Ta-Ta Toothie replied to the thread Help me understand slugs better.For one is the FX heavy liner.
- Ta-Ta Toothie replied to the thread Help me understand slugs better.Again negative that airguns barrels need to be un-choked in order to shoot correctly. I'm not talking about twist rate. It's been done...
- Ta-Ta Toothie replied to the thread Help me understand slugs better.Negative, choked barrels work just fine. You just need the right one.
- I sorely get tempted to shoot from inside the house in Winter, letting the cold in precludes that and shooting through a window…?!🫣 That...
