Tim23's latest activity

Agree on their instructions. Maybe I'll reply to Umarex to tell them it's been corrected, not by following their instructions, but...

Glad that worked out, they at least need to change the directions and recommend something more than a few drops of silicone every 500...

I just took everything apart again, wanted to put a bit of loctite on everything... reassembled, and its smooth. Now I just need to...

I'd normally agree with that statement, but per the Umarex notos manual, they suggest the RWS Chamber lube that is 100% silicone for the...

I was highly skeptical, but my moly paste just arrived.. I polished the firing pin, and knocked off any burrs I felt dragging. That...

I think as you put pressure on the firing pin, your then putting pressure on the hammer bushing that also binds up some. Plus it would...

This is one of many points that it binding.. I can take it apart knock down the burrs, assemble.. get 3-5 smooth cocks, starts to get...

Agree 100% (I was calling it the firing pin too, no idea the real term) ... If I manipulate the arms on the firing pin, it sometimes...

I changed my mind on what is binding.. Looking over it again, its the front shaft of the firing pin, binding on the front silver...

I do have it.. just found that out.

I got mine last July, this was at a time, when they were all backordered, but found one in stock..

I ended up tearing the gun down. I have less than 1 tin of pellets fired. Cleaned everything up, lubed it... My pins were all seated...

I started having the same issue.. My cocking was never smooth, but it would always cock.. now it gets to the point where it just wont...