The action of this rifle is one of the original MPR guns sold by Air Arms as an entry level match rifle. This one would have come with the stock that you could take down, match sights, etc.
I purchased the action not long ago as a left handed action. I swapped it over to right handed with the addition of a right handed aluminum bolt handle and an MPR FT stock that I found here. I also added a factory barrel band.
I converted it from having a removable cylinder with the gauge on the end to having a fixed foster fill assembly. Because of this, the gun does not have an air gauge. I do still have the gauge that goes in the end if you prefer to use a removable cylinder and have a gauge.
The stock has had a bed liner coating applied (pretty sure it's Duplicolor) and it's actually pretty nice. It's a little rough around the underside where the usual air gauge would be, but it's not bad by any means. There is no butt plate. The person who sold me the stock included some wooden pieces to lengthen the stock if you want. I was going to buy something generic and use that, but decided to part with this instead.
Metal is in great shape w with a few slight scratches and nicks here and there from normal use and handing. I do not know the velocity, but this was marketed as a 10meter gun, so it's less than the usual 12fpe. It does have the side port adjusting screw but that has a security torx screw in it.
So, take a look at the pics and message me with any questions.
Asking $400 plus actual shipping and insurance in the CONUS. I'll ship stock separate from action as these stocks are known for cracking at the wrist, so that may increase shipping cost a tad. PayPal friends and family or add 3.5% to cover fees. USPS money order will work as well.
Please email tobinwebster at yahoo dot com
I purchased the action not long ago as a left handed action. I swapped it over to right handed with the addition of a right handed aluminum bolt handle and an MPR FT stock that I found here. I also added a factory barrel band.
I converted it from having a removable cylinder with the gauge on the end to having a fixed foster fill assembly. Because of this, the gun does not have an air gauge. I do still have the gauge that goes in the end if you prefer to use a removable cylinder and have a gauge.
The stock has had a bed liner coating applied (pretty sure it's Duplicolor) and it's actually pretty nice. It's a little rough around the underside where the usual air gauge would be, but it's not bad by any means. There is no butt plate. The person who sold me the stock included some wooden pieces to lengthen the stock if you want. I was going to buy something generic and use that, but decided to part with this instead.
Metal is in great shape w with a few slight scratches and nicks here and there from normal use and handing. I do not know the velocity, but this was marketed as a 10meter gun, so it's less than the usual 12fpe. It does have the side port adjusting screw but that has a security torx screw in it.
So, take a look at the pics and message me with any questions.
Asking $400 plus actual shipping and insurance in the CONUS. I'll ship stock separate from action as these stocks are known for cracking at the wrist, so that may increase shipping cost a tad. PayPal friends and family or add 3.5% to cover fees. USPS money order will work as well.
Please email tobinwebster at yahoo dot com