• The buying, selling, trading, or gifting of a standalone airgun moderator is prohibited in the Classified section. An airgun moderator may be included in your ad ONLY if it is "affixed" to the airgun. Please review the updated Classified Rules and Known Scammers List before engaging in ANY transaction.

[SOLD] Artemis CP2 (diana chaser) .22 pistol + laser + carbine stock + silencer + case

Status
Not open for further replies.
Artemis CP2 (aka diana chaser) .22 pistol with:

  • carbine stock
  • plano case
  • single pellet tray + 7 shot magazine
  • 3d printed co2 holder (w/ out co2)
  • 3d printed threaded silencer
  • barrel band with laser

I took a single co2 cartridge worth of chrony readings (@ 70 degrees indoors). The first 10 shots were with 21.14 gr H&N baracuda match pellets (~6.5 fpe), remaining 32 shots with 14.3 gr crossman domed pellets (~6.2fpe). I stopped at 42 shots total when power dropped below 6fpe.

Purchased ~10 weeks ago, thoroughly cleaned out the barrel with a patchworm kit on arrival. I drilled out the ports to try and increase power. I’m including a stronger hammer spring which you can swap in for a small boost of ~15fps. I decided it wasn’t worth the gain as it makes the trigger heavier. The front grub screw does not tighten down but doesn’t seem to matter. I am getting <1” groups at 15 yards with a scope from the bench. 

Asking $80 + split shipping from Northern CA (I’m guessing w/ costs split it will be ~$10-20 west coast, $15-25 to midwest, ~$20-30 east coast) but this is just a guess.

Venmo, Zelle, Paypal F&F or Paypal commercial + 10%.

IMG_3783.1639963075.jpg
IMG_3785.1639963073.jpg
IMG_3859.1639963066.PNG
IMG_3860.1639963065.PNG
IMG_3861.1639963063.PNG
IMG_3862.1639963062.PNG
IMG_3863.1639963059.PNG
IMG_3786.1639963071.jpg
IMG_3784.1639963074.jpg
IMG_3787.1639963069.jpg

 
Status
Not open for further replies.