I'm selling my gen 1 AEA terminator. Still have the original box and manual. Had to reduce price substantially, didn't realize how much less new ones were going for.
It has the upgraded rear cf bottle and the longer front air tube, but I also have the original shorter air tube for it, and the original metal rear tank. There is no valve on the metal rear tank, so you can't carry it filled as a spare.
It comes with the folding tactical stock that can be used in place of the rear tank at the expense of shot count. The gun also functions with no rear stock or tank on at all.
It has 3 of the metal magazines (10 shot), as well as some spare parts for them. Also some spare parts for the gun itself, including an extra valve pin. (The existing one is very new, probably around 100 shots on it)
It comes with 11 unopened tins of JSB 81 grain pellets, and another 30ish in an unfinished tin. That's a bit over 1100 rounds.
Also included is the tube clamp picatinny rail that allows a bipod to be used.
I had no luck getting this gun to cycle slugs, and I tried a few different ones, including some that weighed less than the pellets. You can single load them if you want but IMO it's not worth the trouble.
A while back I got tired of the bolt handle coming loose. I should've used thread tape but I used loctite. In my defense, I thought that part was metal, and could be warmed up later if needed. Well, I needed to when I replaced the sliding rod balancer. I used a torch on what I thought was a metal bolt handle and... turns out it was plastic. I was going to get an original to replace it but there are people who make aftermarket ones that are larger, and actually are metal, so I thought I'd give the buyer the option. I can either get an original replacement for it, or you the buyer can order one from someone else and I'll knock the price down a tad.
With max air capacity setup, you can get 3 full magazines. The first shots will be around 900 fps and the 30th around 800 fps. With no rear tank and using the short front tube, only around 1 magazine. With the long tube but no rear tank, about 2 mags.
Soft case included
The scope can be included if you want it. The scope is a 1-6×24 trueglow red/green lit reticle. No batteries included.
$1000 for everything except the scope and scope mount
$1125 for everything.
$800 for everything except the unopened tins of pellets and scope/mount
I'll split shipping cost in the US
Hit me up with any questions
It has the upgraded rear cf bottle and the longer front air tube, but I also have the original shorter air tube for it, and the original metal rear tank. There is no valve on the metal rear tank, so you can't carry it filled as a spare.
It comes with the folding tactical stock that can be used in place of the rear tank at the expense of shot count. The gun also functions with no rear stock or tank on at all.
It has 3 of the metal magazines (10 shot), as well as some spare parts for them. Also some spare parts for the gun itself, including an extra valve pin. (The existing one is very new, probably around 100 shots on it)
It comes with 11 unopened tins of JSB 81 grain pellets, and another 30ish in an unfinished tin. That's a bit over 1100 rounds.
Also included is the tube clamp picatinny rail that allows a bipod to be used.
I had no luck getting this gun to cycle slugs, and I tried a few different ones, including some that weighed less than the pellets. You can single load them if you want but IMO it's not worth the trouble.
A while back I got tired of the bolt handle coming loose. I should've used thread tape but I used loctite. In my defense, I thought that part was metal, and could be warmed up later if needed. Well, I needed to when I replaced the sliding rod balancer. I used a torch on what I thought was a metal bolt handle and... turns out it was plastic. I was going to get an original to replace it but there are people who make aftermarket ones that are larger, and actually are metal, so I thought I'd give the buyer the option. I can either get an original replacement for it, or you the buyer can order one from someone else and I'll knock the price down a tad.
With max air capacity setup, you can get 3 full magazines. The first shots will be around 900 fps and the 30th around 800 fps. With no rear tank and using the short front tube, only around 1 magazine. With the long tube but no rear tank, about 2 mags.
Soft case included
The scope can be included if you want it. The scope is a 1-6×24 trueglow red/green lit reticle. No batteries included.
$1000 for everything except the scope and scope mount
$1125 for everything.
$800 for everything except the unopened tins of pellets and scope/mount
I'll split shipping cost in the US
Hit me up with any questions
Last edited:
