Desktop CNC Mill - Ball Screw-repeatable to 0.005" or better. Mach 3 Controlled, Coolant mister, all tools will go with the machine. Belt driven - Lots of cutters, 1,2,3, blocks, dial indicators, etc. etc. etc. etc.
Desktop mini lathe, quick change tool post, boring bar, etc,. etc.
I'm moving to South Carolina and won't be taking them with me.
CNC Mill - $3,000 OBO Harbor Freight S2 - Same as this one https://littlemachineshop.com/products/product_view.php?ProductID=4962
Oversized Ball Screws and Rolled screw. Kit was around $1,200 IIRC plus little mods to have it fit better.
2 Position Belt Drive from LMS - Low speed IIRC 450 to 1200 and 1200 to 4500 RPM - Keeps from breaking plastic gears and much higher speed for Al.
NEMA 17 420 oz. Stepper Motors and Mounts
Gecko Vampire Drives, All three axis - https://www.geckodrive.com/products/g203v-digital-step-drive
PMDX-135 Power Prep Module - http://www.pmdx.com/PMDX-135
PMDX-122 Bi-Directional Break-out Board - http://www.pmdx.com/PMDX-122
Mach3 Controller Software
Desktop PC with 17" Flat Monitor
Emergency Stop
Home switches
Full set of Collets from LMS - https://littlemachineshop.com/products/product_view.php?ProductID=4860&category=
Various Carbide 2, 3, and 4 fluted End Mills
Clamps
All mounted on a Corian Counter top surface with 3 sides enclosed to control chips.
Mounted on 4 Drawer work Bench with Casters.
Fog Buster Misting system - https://littlemachineshop.com/products/product_view.php?ProductID=4718&category=
Edge Technology ProTram System
Lathe - $500.00 OBO https://littlemachineshop.com/products/product_view.php?ProductID=4959&category=1271799306
Lathe Tool Package it's changed some since I bought it. https://littlemachineshop.com/products/product_view.php?ProductID=4116&category=
Edge Technology 08-000 Speedy Lathe Gage - setting tooling height.
I can send photos, if interested.
Located in La Mirada, Ca.
Smitty
*Approved airgun related tool/equipment -Michael
Desktop mini lathe, quick change tool post, boring bar, etc,. etc.
I'm moving to South Carolina and won't be taking them with me.
CNC Mill - $3,000 OBO Harbor Freight S2 - Same as this one https://littlemachineshop.com/products/product_view.php?ProductID=4962
Oversized Ball Screws and Rolled screw. Kit was around $1,200 IIRC plus little mods to have it fit better.
2 Position Belt Drive from LMS - Low speed IIRC 450 to 1200 and 1200 to 4500 RPM - Keeps from breaking plastic gears and much higher speed for Al.
NEMA 17 420 oz. Stepper Motors and Mounts
Gecko Vampire Drives, All three axis - https://www.geckodrive.com/products/g203v-digital-step-drive
PMDX-135 Power Prep Module - http://www.pmdx.com/PMDX-135
PMDX-122 Bi-Directional Break-out Board - http://www.pmdx.com/PMDX-122
Mach3 Controller Software
Desktop PC with 17" Flat Monitor
Emergency Stop
Home switches
Full set of Collets from LMS - https://littlemachineshop.com/products/product_view.php?ProductID=4860&category=
Various Carbide 2, 3, and 4 fluted End Mills
Clamps
All mounted on a Corian Counter top surface with 3 sides enclosed to control chips.
Mounted on 4 Drawer work Bench with Casters.
Fog Buster Misting system - https://littlemachineshop.com/products/product_view.php?ProductID=4718&category=
Edge Technology ProTram System
Lathe - $500.00 OBO https://littlemachineshop.com/products/product_view.php?ProductID=4959&category=1271799306
Lathe Tool Package it's changed some since I bought it. https://littlemachineshop.com/products/product_view.php?ProductID=4116&category=
Edge Technology 08-000 Speedy Lathe Gage - setting tooling height.
I can send photos, if interested.
Located in La Mirada, Ca.
Smitty
*Approved airgun related tool/equipment -Michael
Last edited: