Altaros M24 in stock!
- Thread starter Airgun Nation
- Start date
item!
I don't understand why a 60 f.p.e.
making air gun can't be sold
outside the E.U. I can buy any other
product they make but that one?
I reached out to Altaros twice, asking
if they were working on clearance to sell
to U.S. clientele, with no response.
making air gun can't be sold
outside the E.U. I can buy any other
product they make but that one?
I reached out to Altaros twice, asking
if they were working on clearance to sell
to U.S. clientele, with no response.
Upvote 0
I must admit these are tempting, it is fortunate i am saving for other stuff, and there are not much "talk " about the .177 version
Seen some videos of the .22 version loading 56 grain slugs,,,,, which in size look like a regular .22 round + casing.
I do very much like the looks of these, and that you need to be tethered are no problem for me as i do that anyway.
I think the reason they only sell in " EU ville " is rules, it is probably more problematic to sell to the US,,,,, then again Krale ASO do that just fine,,, so
Seen some videos of the .22 version loading 56 grain slugs,,,,, which in size look like a regular .22 round + casing.
I do very much like the looks of these, and that you need to be tethered are no problem for me as i do that anyway.
I think the reason they only sell in " EU ville " is rules, it is probably more problematic to sell to the US,,,,, then again Krale ASO do that just fine,,, so
Upvote 0
I’d like to try one of these for the N50 sportsman class. Have to do some fancy footwork to get a hold of one, though.
Mike
Mike
Upvote 0
hehe yeah, you probably have to ( one of my favorite English words ) "Circumvent" a couple of tight spots.
I am a bit amazed these have not created more of a ruckus in the airgun world, they do seem to be made up of OK parts and all, i can only assume it is the lack of a air tank and a magazine that have made it so most have gone elsewhere.
I am totally OK with single shot loading at the bench.
I am a bit amazed these have not created more of a ruckus in the airgun world, they do seem to be made up of OK parts and all, i can only assume it is the lack of a air tank and a magazine that have made it so most have gone elsewhere.
I am totally OK with single shot loading at the bench.
Upvote 0
Certainly couldn't be because nobody actually owns one to be able to review it. The only videos made of this product are crudely produced by them, the self proclaimed world record is what really irritates me the most.hehe yeah, you probably have to ( one of my favorite English words ) "Circumvent" a couple of tight spots.
I am a bit amazed these have not created more of a ruckus in the airgun world, they do seem to be made up of OK parts and all, i can only assume it is the lack of a air tank and a magazine that have made it so most have gone elsewhere.
I am totally OK with single shot loading at the bench.
Upvote 0
I totally agree, while alluring, there are also some little bells going off, and it is not a cosplaying GF dressed up as a slutty tinker bell. 
I really would like a neutral party to test the damn thing, and by that i dont even mean any of the top brass airgun people / channels.
I really would like a neutral party to test the damn thing, and by that i dont even mean any of the top brass airgun people / channels.
Upvote 0
I totally agree, while alluring, there are also some little bells going off, and it is not a cosplaying GF dressed up as a slutty tinker bell.
I really would like a neutral party to test the damn thing, and by that i dont even mean any of the top brass airgun people / channels.
Upvote 0
It sort of remind me a little about how i understand some airsoft rifles work, where you have a 12g CO2 bottle inside the hammer / bolt itself
It do look very simple / primitive, but that dont mean it cant shoot, my vulcan 3 are pretty damn simple too, and not much different from the first AGT vulcan, and it shoot pretty well, i had many more qualms with my "high end " FX Maverick.
At least it should be easy to load, even if you have sort of meat cleaver hands
Actually earlier in the day i took a look at the 2 documents on their page, the general quick start guide / manual, and a tuning manual.
I was hoping to find a diagram of course, but did not get that lucky.
It do look very simple / primitive, but that dont mean it cant shoot, my vulcan 3 are pretty damn simple too, and not much different from the first AGT vulcan, and it shoot pretty well, i had many more qualms with my "high end " FX Maverick.
At least it should be easy to load, even if you have sort of meat cleaver hands
Actually earlier in the day i took a look at the 2 documents on their page, the general quick start guide / manual, and a tuning manual.
I was hoping to find a diagram of course, but did not get that lucky.
Upvote 0
Single shot 60 FPE .22 that can only be shot from a bench attached to a tank ?.......Hmmmmm no thanks
Upvote 0
If it shoots slugs well…it could be the only factory rifle that might be competitive in N50 sportsman class. Tethering is just fine.
Upvote 0
First air rifle I’ve seen with tubing… don’t know what to make of that. Those pics are the first thing I’ve seen about this gun that wasn’t just 1) an opinion 2) a guess or 3) advertisement
Upvote 0
Yup exactly.. they put the gun in YouTube 3 years ago shooting 61g bullet at 950fps + in a 9 twist barrel that was a interesting gun .. all that to sell a run of the mill slug shooter..I don't have a problem with a bench gun even my uragans are to heavy with all the gear..but trying to sell a gun promoting another..that is something that even FX don't do..what is even more dumb..is that the guy in YouTube is so impatient..because half of the viewers don't believe half of the crapy video..what's does he think that viewers are throwing rocks.?most of the viewers have all kinds of pcp..+ experience in shooting cast bullets..Single shot 60 FPE .22 that can only be shot from a bench attached to a tank ?.......Hmmmmm no thanks
Upvote 0
... maybe I never noticed with a gun out of the stock, but how far does the trigger need to be pulled back to fire? Not that I'm a trigger snob.
Allen
Upvote 0
Have not a clue, only found one video of this thing actually taken apart and it looks horrible. That hose looks like a ticking time bomb waiting to flail off at any second.
Upvote 0