If I read the numbers correctly, it is a 2007 July version. But it has some small scratches, so I have to sand it down and polish it back to mint condition. The walnut looks promising.
Very nice KWK!Don't "sand it down". Use stripper and then go over it with 220. Wire brush the checkers. Chased them out very carefully with a curved needle file. I stained one of mine before finish coats. Don't sand too smooth before stain. That's wrong. Use Minwax Antique oil. See some videos. Webley walnut can be beautiful. I wouldn't "plastic coat" it with tru oil. First picture is how I got it. Top rifle (a .25 cal 23 ft lb) is stained with Minwax red oak. Washed it down with mineral spirits then because it was a little too dark. Bottom pic is my other Tommy .22. Good luck!View attachment 288390
View attachment 288386View attachment 288387
Good work my man, good work!Thank you. Your gun is looking great. I prefer to use a finish I can repair if necessary. Although I very rarely mark any of my guns, I'm exceptionaly good with them from habit, I was just always that way. People think I never shot them. HA! I carried them afield. Some over many years. The .25 feels silky in your hands and looks really cool up close. Pictures don't capture it. Enough finish to fill most of the pores. Not all. Didn't take many coats. The stain filled some and I "sanded in" the first coat of finish. Head and shoulders above the factory finish. I had to refinish tthe rifle because the comb was so high that high scope rings weren't high enough. Like a factory boo boo or something. I reshaped the comb, stripped it, then refinished. What an awesome gun to shootand own. It doesn't recoil as much as my Slade tuned .22. At 23 ft lb with FTT's. Look how high the comb was next to my .22 Tommy.
View attachment 288528
Fixed and much better. See how sharp the diamonds are? I chased them out with a three corner jewelers file that I heated and curved at the tip. Just takes patience and concentration. Skill? Maybe a little.View attachment 288530