hmm - I used Royal Purple SynFilm Recip. 100 when I was using a Yong Heng for a couple of years and it never smoked. I did switch to Seco 500 for the new Tuxing I recently bought.
Upvote 0
Just Ordered A Tuxing TXEDT033
- Thread starter MikeAllen
- Start date
You are able to switch the auto purge off if you wish. You can also override auto cutoff as well.
Upvote 0
Personally I like the auto shutoff...WHEN the ECU doesn't dump, it's not totally accurate so some tweaking is required to get the pressure. I do like the unit. I got a great deal on it from Amazon, and once you can chat with the company they are eager to please. I barely have an hour on mine so hardly an expert.
Upvote 0
Can you buy a reliable warranty from Tuxing? Only way I would get this is with the 3 or 4 year warranties.
Upvote 0
You can buy plenty of replacement parts and probably get some free parts from Tuxing, with the savings by buying direct. Tuxing responds well to my emails within minutes. Once they deliver it it could be another story. So it's twice as much as a single cylinder YH. You could also buy it for a lot less without the water tank, you can save more with out the filter towers, you can buy it with 1 filter tower, with or without tank? Different models have more or less features to satisfy any budget. 799 shipped from Tuxing warehouse cali.
Upvote 0
Would you mind sharing the email address? I've been messaging Tuxing through Amazon for a couple issues I had with the 032 I purchased. That has worked fine for now but in the future if I have questions it would be nice to have another way to contact them.
On free parts, during Amazon messages I asked about a spare controller board, crankcase breather, the u-shaped tube assembly (connecting both filters at the top) and some other spare parts and they shipped them out to me. Pretty cool.
Upvote 0
I always correspond with Alisha at:
[email protected]
She has ALWAYS gone above and beyond for me. However, I bought mine direct on Tuxing site.
[email protected]
She has ALWAYS gone above and beyond for me. However, I bought mine direct on Tuxing site.
Upvote 0
Probably one person with various emails just to confuse us.
I purchased a 3 L bottle from them also without a valve. It reads Mouth:M18*1.5 300 bar Where can I get a nice valve and hose for this thing. Obviously I want to fill it and fill my rifle with it? I haven't any experience with these and am unsure of what to purchase and where to purchase, to allow this to work with the 032 compressor? Any directions on how I can spend more money is highly appreciated. Thanks.
I purchased a 3 L bottle from them also without a valve. It reads Mouth:M18*1.5 300 bar Where can I get a nice valve and hose for this thing. Obviously I want to fill it and fill my rifle with it? I haven't any experience with these and am unsure of what to purchase and where to purchase, to allow this to work with the 032 compressor? Any directions on how I can spend more money is highly appreciated. Thanks.
Upvote 0
Saber Tactical
Tank Valve Adapter:
Tank Valve Adapter M18x1.5 ST0037
This adapter allows you to convert the threads on our tank valve from 7/8-14 to M18x1.5. The M18x1.5 is common on carbon fiber gun tanks. Features: 7075 Aluminum Black Anodize Female 7/8-14 threads Male M18x1.5 threads
sabertacticalinc.com Tank Valve:
Saber Tactical Tank Valve - Enhanced Control and Efficiency – Saber Tactical Inc
Replace your factory tank valve with our larger, more efficient valve. The large knobs and handle make filling and releasing air a breeze, providing enhanced control and ease of use for just $200
sabertacticalinc.com 
Upvote 0
Morning all. For the Tuxing 033and 032 use only Seco 500 oil. Use 8 capfuls of wetter water by redline in the water tank with a gallon of drinking water. I have informed the factory several times for over a year to stop suggesting royal purple. I have the 032 that I did original review on it is still filling tanks daily I have over 158hrs on it and it has worked very well. The only changes have been hp rings and worn gaskets.
Upvote 0
Deltaman I have m18x1.5 threaded valves for your tank, they feature a seperate fill checkvalve from the main fill valve. You dont have to open your tank valve to fill it. Give me a call if you need one you can reach me at 702-406-0200
Regards
Brian
Regards
Brian
Brian, what about using 50/50 premixed automobile antifreeze instead of the water wetter solution? This is what Tuxing recommends.
Upvote 0
Mike, No on the anitfreeze, it will draw the minerals out of the metal and create a salt like substance that will plug up the water system. I have spoken to the factory several times over the last 3 years and they just dont change there manual, but they are aware of the effects of antifreeze on the system we have reported to them. Using the watter wetter and drinking water I have never had the build up and my temps stay right around 125f even in this hot humid Texas environment. Also for oil a quick note do not use Seco 800 tropics in the 032 0r the 033 it will foam and not lubricate well. The 800 tropics is for the 4 stage Tuxing compressors.
Upvote 0
Thanks Brian. Funny that Tuxing suggested antifreeze to me in the last 2-3 weeks! This might have been feedback from the “Tuxing Official Store “ in California.
Upvote 0