Hey guys! Took my new .177 Field Target out for its maiden voyage today at the weekly Tuesday “Old Geezer Match. It was set up at 26yds with a 1” KZ reducer installed and was shot with 12 FP Springers and 20 FP PCP rifles. It worked perfectly. Then at midway it was moved to 53 yds and reducer was removed and then shot at with the same rifles. Again it worked perfectly. Was easy to reset and when paddle was hit it went down.
The reducers are installed on the outside of the faceplate as per AAFTA rules.
I don’t have a video of it working but it is very reliable and showed no damage at all.
I bought my own welder and am doing my own welding. So I am able to reduce the price on them. Anyone that purchased any prior to this I will be dealing with each on an individual basis. I have been asked to have them fall at a 55 degree angle so there is more movement in the target. I will start making more of them and will have mechanisms in stock and will just need to know what faceplate style you want. I can cut almost any design for the faceplate. More intricate designs are a bit more $. The new design now have less welds and and only 3 visible welds.
Contact me if you are interested in them. They are high quality and are not the least expensive targets available they run $130 plus shipping. They come with 2) reducers of your choice.
For a well made and trouble free target give it a try!
I have tested my new design regular FT in 4) matches and yesterday was a 60 shot match. Target worked perfectly and had no issues. I will test it again next Saturday in another local match. But so far so good! If you want just one size KZ I can cut it for you.
The reducers are installed on the outside of the faceplate as per AAFTA rules.
I don’t have a video of it working but it is very reliable and showed no damage at all.
I bought my own welder and am doing my own welding. So I am able to reduce the price on them. Anyone that purchased any prior to this I will be dealing with each on an individual basis. I have been asked to have them fall at a 55 degree angle so there is more movement in the target. I will start making more of them and will have mechanisms in stock and will just need to know what faceplate style you want. I can cut almost any design for the faceplate. More intricate designs are a bit more $. The new design now have less welds and and only 3 visible welds.
Contact me if you are interested in them. They are high quality and are not the least expensive targets available they run $130 plus shipping. They come with 2) reducers of your choice.
For a well made and trouble free target give it a try!
I have tested my new design regular FT in 4) matches and yesterday was a 60 shot match. Target worked perfectly and had no issues. I will test it again next Saturday in another local match. But so far so good! If you want just one size KZ I can cut it for you.
