This is a build I've put together in the last couple months with great success. With the 700mm CZ barrel, two TT power plenums, the HUMA reg set approximately around 130 bar, and a nylon washer behind the factory hammer spring it is generating max about 55 fpe with 22 and 24.8 grain slugs. Other upgrades include...
1) factory 8 magazine holder and two 3D printed 2 mag holders
2) digital Sekhmet pressure gauge w/ a printed owners manual
3) a custom carbon fiber barrel shroud/tensioner
4) a HUMA regulator(currently set around 130 bar)
5) DonnyFL KOI moderator
6) DonnyFL speed dialer(does have some rash but perfectly functional)
All aspects of this gun and its components are 100% functional...zero leaks or issues. That said it does have some beauty marks here and there but nothing major...10/10 functionally and 8+/10 cosmetically. It has the typical Taipan reliability, dependability, and consistency from day to day. These things are built like a tank. Don't forget the amazing trigger on these guns! Even with a 700mm barrel and a 7" moderator it is under 40" long!
Included are also...
1) fill probe
2) a single shot tray
3) 12 mags total(2 factory, 4 resin, 6 3d printed; all work great)
4) 3d printed cheek pieces
5) extra o-rings, a bipod
6) two factory regulators with extra plenum spacers
7) a modified machine screw for adjusting the HUMA reg without disassembling the gun
8) a pan head screw for degassing by depressing the valve via the HST speed dialer
9) an extra nylon washer for the HST speed dialer
10) a picatinny rail mounted level
11) a picatinny accessory rail mounted to the stock
12) Also included is the original Long CZ barrel(550mm) that shot Hades pellets lights out before I removed it. It has a 1/2x20 unf moderator adaptor with the factory Taipan shroud
13) a printed Taipan instruction manual
14) the original pressure gauge
15) an AC500 chronograph
16) 300 FX Hybrid slugs
I've loved this gun as it's very reliable and consistent and a tack driver but I just don't have the time to justify it sitting on the shelf. Currently, at 130 bar reg and current HST setting it's pushing 22 grain FX Hybrids to around 980 fps=50 fpe with great accuracy...under half inch groups at 50 meters all day. It uses right around 2-3 bar/shot at this setting. That's around 50 shots per fill. Earlier I was shooting 24.8 grain NSA slugs to 950 fps(49 fpe) with great success. None of the slugs I've tried so far have been terribly inaccurate and two have produced sub-MOA; FX Hybrid's and 24.8 NSA's in .2165" and .216". Absolute killing machine...shot a pigeon at 118 meters the other day. Oh, also included are the slugs pictured...The full value of all this is well over $2000 but I just want to get a return for most of my investment...asking $1550 TYD in CONUS for the complete package listed here, no trades, Zelle or PayPal only, local pickup in south-central PA for $1500...message me if you want more photos or info...SCOPE NOT INCLUDEDED
1) factory 8 magazine holder and two 3D printed 2 mag holders
2) digital Sekhmet pressure gauge w/ a printed owners manual
3) a custom carbon fiber barrel shroud/tensioner
4) a HUMA regulator(currently set around 130 bar)
5) DonnyFL KOI moderator
6) DonnyFL speed dialer(does have some rash but perfectly functional)
All aspects of this gun and its components are 100% functional...zero leaks or issues. That said it does have some beauty marks here and there but nothing major...10/10 functionally and 8+/10 cosmetically. It has the typical Taipan reliability, dependability, and consistency from day to day. These things are built like a tank. Don't forget the amazing trigger on these guns! Even with a 700mm barrel and a 7" moderator it is under 40" long!
1) fill probe
2) a single shot tray
3) 12 mags total(2 factory, 4 resin, 6 3d printed; all work great)
4) 3d printed cheek pieces
5) extra o-rings, a bipod
6) two factory regulators with extra plenum spacers
7) a modified machine screw for adjusting the HUMA reg without disassembling the gun
8) a pan head screw for degassing by depressing the valve via the HST speed dialer
9) an extra nylon washer for the HST speed dialer
10) a picatinny rail mounted level
11) a picatinny accessory rail mounted to the stock
12) Also included is the original Long CZ barrel(550mm) that shot Hades pellets lights out before I removed it. It has a 1/2x20 unf moderator adaptor with the factory Taipan shroud
13) a printed Taipan instruction manual
14) the original pressure gauge
15) an AC500 chronograph
16) 300 FX Hybrid slugs
I've loved this gun as it's very reliable and consistent and a tack driver but I just don't have the time to justify it sitting on the shelf. Currently, at 130 bar reg and current HST setting it's pushing 22 grain FX Hybrids to around 980 fps=50 fpe with great accuracy...under half inch groups at 50 meters all day. It uses right around 2-3 bar/shot at this setting. That's around 50 shots per fill. Earlier I was shooting 24.8 grain NSA slugs to 950 fps(49 fpe) with great success. None of the slugs I've tried so far have been terribly inaccurate and two have produced sub-MOA; FX Hybrid's and 24.8 NSA's in .2165" and .216". Absolute killing machine...shot a pigeon at 118 meters the other day. Oh, also included are the slugs pictured...The full value of all this is well over $2000 but I just want to get a return for most of my investment...asking $1550 TYD in CONUS for the complete package listed here, no trades, Zelle or PayPal only, local pickup in south-central PA for $1500...message me if you want more photos or info...SCOPE NOT INCLUDEDED
Last edited:
