Hey guys just wondering if any place sells H&N pellets IN BULK (more than 200/tin), specifically the 21.14 gr Match.
Thank you!
Thank you!
Bulk H & N Pellets (21.14 gr)
- Thread starter EmptyTin_Tim
- Start date
I don't think so
Okay thanks for confirming what I had found on a few places so far.
Is Pyramyd the best deal price per pellet for H&N since they do buy 4 get 1 free? Or other sites have any cheaper per pellet? Roughly 4 cents per with shipping on Pyramyd and the free tin.
Wish there were a site like ammo seek . com but for pellets!!!
Cause I know for JSB I haven't found a cheaper place than Trenier. They don't carry H&N though.
Is Pyramyd the best deal price per pellet for H&N since they do buy 4 get 1 free? Or other sites have any cheaper per pellet? Roughly 4 cents per with shipping on Pyramyd and the free tin.
Wish there were a site like ammo seek . com but for pellets!!!
Cause I know for JSB I haven't found a cheaper place than Trenier. They don't carry H&N though.
Upvote 0
FWIW...
Utah Airguns has the H&N Baracuda .22 | 200 pcs | 21.14gr but they apparently are NOT Match for $8.99 https://utahairguns.com/h-n-baracuda-22-200-pcs-21-14gr/
BUY 4 GET 1 FREE PELLETS! Add 5 to your cart and one will be free. *(Does not apply to slugs.)
Utah Airguns has the H&N Baracuda .22 | 200 pcs | 21.14gr but they apparently are NOT Match for $8.99 https://utahairguns.com/h-n-baracuda-22-200-pcs-21-14gr/
BUY 4 GET 1 FREE PELLETS! Add 5 to your cart and one will be free. *(Does not apply to slugs.)
Upvote 0
Pyramyd has the same price for non Match 
Seems to me like H&N tells everyone to sell their stuff at the same price. Buy x tins get 1 free sounds like the only deal we will get
Seems to me like H&N tells everyone to sell their stuff at the same price. Buy x tins get 1 free sounds like the only deal we will get
Upvote 0
Just for giggles, check with Krale's. Even though shipping cost a lot (depending on where you are), it seems to offset with the really good pricing of the tins.
Mike
Mike
Upvote 0
About 11 bucks more for 4 tins at Krale even with cheaper starting price per tin compared to Pyramyd. And even then that's with 2 day shipping from PA. Who knows how long it'd take from Krale lol
Upvote 0
EmptyTin_ Tim
we need to find you a wholesale place to get it by the 55 gallon barrel full.. then you can be overflowing tin Tim.. and have a great time shooting.. I heard that pyramid air buys in barrels and packages them in tins, but I think it was just a rumor.. I'm sure the factory fills the tins just like most factory do..
I wonder if they have like a case lot that could be purchased a bit less..
I've also done business with airguns of Arizona.. pretty good company too..
I've heard some people clean the pellets and lube them.. sounds messy.. any thing you do different, I just put in the magazine and repeat..
Mark
we need to find you a wholesale place to get it by the 55 gallon barrel full.. then you can be overflowing tin Tim.. and have a great time shooting.. I heard that pyramid air buys in barrels and packages them in tins, but I think it was just a rumor.. I'm sure the factory fills the tins just like most factory do..
I wonder if they have like a case lot that could be purchased a bit less..
I've also done business with airguns of Arizona.. pretty good company too..
I've heard some people clean the pellets and lube them.. sounds messy.. any thing you do different, I just put in the magazine and repeat..
Mark
Upvote 0
It's kinda hard to beat the 3 days that it takes for krale to my doorstep in SoCal. But you need to buy a whole lot to offset shipping cost.
Allen
Allen
Upvote 0
I bought my last batch from
https://www.fieldsupply.com/airguns/ammo/h_n_sport.html. No tax & free shipping over $25. Packaging was great.
https://www.fieldsupply.com/airguns/ammo/h_n_sport.html. No tax & free shipping over $25. Packaging was great.
Upvote 0
Haha I'd love an entire 55 gallons worth of pellets!!! Basically lifetime supply. I think I'd go through 4 hand pumps or at least 4 sets of seals to even make a dent in that pile lolEmptyTin_ Tim
we need to find you a wholesale place to get it by the 55 gallon barrel full.. then you can be overflowing tin Tim.. and have a great time shooting.. I heard that pyramid air buys in barrels and packages them in tins, but I think it was just a rumor.. I'm sure the factory fills the tins just like most factory do..
I wonder if they have like a case lot that could be purchased a bit less..
I've also done business with airguns of Arizona.. pretty good company too..
I've heard some people clean the pellets and lube them.. sounds messy.. any thing you do different, I just put in the magazine and repeat..
Mark
I am wondering about H&N 21.14 Match because in this thread, @SkeeterHawk had great luck with his Avenger and those pellets. I copied him by having the Doux plenum and putting carbon fiber tubes in the shroud and making a shroud out of carbon fiber to stiffen up everything. Currently have my Avenger at 2k reg, 3.5 hammer spring, shooting JSB 18.13 gr at 896 FPS. Same tune should get me maybe 875 or something similar with the 21.14 if I take a guess.
I do not wash or lubricate pellets but if they are bent or anything obvious I won't use them.
Upvote 0
Just checked, I think this would be the winner. After looking at Pyramyd again it would be $44.67 for 800 pellets shipped w/2 day, but Field Supply is only $34.72 for 800 so definitely cheaper and more on track with the $0.04/pellet that I said earlier. FS is on sale so idk how much longer it'd be the winner though. And I forget what time frame shipping is but hey its free.
Did you see how it says free shipping over $25 but excludes ammo? Guess they mean actual cartridges. Lucky us!
I am weary getting pellets from places other than actual airgun shops cause of the packaging. I've heard Midway USA is one of the worst for pellet packaging. But I'm glad to hear Field Supply is good for how they wrap pellet tins.
Upvote 0
I'm Midwest so probably add a couple days to get to me. Yeah I wonder if they have a tiered shipping cost like X amount in pounds gets X cost cause you figure that's a very long way to ship lead!
Upvote 0
I am running my regulator at 2600 right now, and I believe that the hammer spring is about 2.5 turns. I adjust it as needed, but I believe that is about where it is right now. I keep my regulator a little higher mostly because that was where I got the most consistent grouping, plus it lets me use a lighter hammer and have a lighter cocking stroke. I like to shoot pretty quick because most of my targets are moving. It will also let me use heavier pellets or slugs if I want to, but I haven't found anything that my Avenger barrel likes better than the Baracuda Match 5.51 dia head.
One thing to note is that there is a LOT of variability in the pellets. Even in the "match" version. If you really want to get to know what your gun REALLY likes, you need to sort these by weight and head size before you start the extensive testing. What I do is find a tune that is giving me about MOA with pellets out of the tin and then sort for head size and then by weight. You'll be surprised at how consistent the shots can be when you are using consistent ammo...but even out of the tin the Baracuda does better than anything else. Sort to get the edge
Upvote 0
you need to get a Omega trail charger
.. I just use mine and turn the lube pot knob a click per year Upvote 0
and I would also like to know why in the world are airgun barrel just thin tubing.. and the spacers and shroud and now carbon fiber stiffing.. why don't they start using full size barrel.. big heavy and stiff like the Henry or better yet a sharps.. I also wish we could get a double set trigger like I had on a black powder squirrel rifle.. if you ever shoot double set trigger, you'd like one on every gun.. standard good trigger and then if you pull the double set it clicks and then your regular trigger is a hair trigger.. then you have a trigger for any use..you need to get a Omega trail charger
we need to combine all the good features of the black powder trigger, the sharps barrel and put it on a airgun
Mark
Upvote 0
Hey its the inspiration himself, SkeeterHawk!I am running my regulator at 2600 right now, and I believe that the hammer spring is about 2.5 turns. I adjust it as needed, but I believe that is about where it is right now. I keep my regulator a little higher mostly because that was where I got the most consistent grouping, plus it lets me use a lighter hammer and have a lighter cocking stroke. I like to shoot pretty quick because most of my targets are moving. It will also let me use heavier pellets or slugs if I want to, but I haven't found anything that my Avenger barrel likes better than the Baracuda Match 5.51 dia head.
One thing to note is that there is a LOT of variability in the pellets. Even in the "match" version. If you really want to get to know what your gun REALLY likes, you need to sort these by weight and head size before you start the extensive testing. What I do is find a tune that is giving me about MOA with pellets out of the tin and then sort for head size and then by weight. You'll be surprised at how consistent the shots can be when you are using consistent ammo...but even out of the tin the Baracuda does better than anything else. Sort to get the edge
What kind of velocities are you getting with 2.6k reg and 2.5 HS? I understand what you mean about being able to adjust HS easily for shooting other projectiles, its amazing the range of stuff we can send down range with these Avengers!
I hand pump my Avenger with a 4 stage pump and it takes me about 225 pumps to go from 2k to 4k with my 350cc bottle and Doux Plenum.
The amount of pumps would go down if I upped the reg to 2.6k, but I'd imagine I'd also lose put on quite a few shots. I think I get about 80 now. How many do you get at 2.6k reg 2.5 HS?
Good tips on the Baracudas! I spend my "free time" pumping up my gun, not sure I'd be down to sort pellets like that since I don't compete. Lol But I have gotten the accuracy bug and did a bore polish and crown and got this group of 10 shots at 30 yards but with JSB 18.13 gr
Looks better if I fold the paper up haha
At some point I'm gonna get out my stuff and try some of the 5.51 Baracuda Match I have. I got 5.52 as well but will have to see what's best.
The JSB are good quality but I pick up the Baracuda Match and always go, "Wow the Germans are living up to their meticulous engineering stereotype again." Lol those H&N are clean and very uniform.
I wonder if something else that helps our Avengers shoot them well is the very deep pocket in the skirt? Seems to be the perfect funnel for where the pellet probe would push and load. Would center it very easily.
Upvote 0
All of our products are packed by us, even those with OEM label, and never shipped in bulk. This would be very detrimental to the quality of the pellets and slugs (just think of the weight that would be on the bottom pellets in a bulk pack).EmptyTin_ Tim
we need to find you a wholesale place to get it by the 55 gallon barrel full.. then you can be overflowing tin Tim.. and have a great time shooting.. I heard that pyramid air buys in barrels and packages them in tins, but I think it was just a rumor.. I'm sure the factory fills the tins just like most factory do..
I wonder if they have like a case lot that could be purchased a bit less..
I've also done business with airguns of Arizona.. pretty good company too..
I've heard some people clean the pellets and lube them.. sounds messy.. any thing you do different, I just put in the magazine and repeat..
Mark
Best regards
Jörg
Upvote 0
Thank you Jörg for explaining why we don't see more than 200 pellets in a tin. We appreciate your efforts to make and maintain very high quality pellets!
Upvote 0