Spring piston airgun, maximum power today?

The 135 is the top dog, mass produced springer these days for power.

Sqwirlfugger57 said:

The 135 is the top dog, mass produced springer these days for power.

Click to expand...

I was just looking at one

I have the Hatsan 135QE. Been through the entire gun and trigger with a tune. 25 caliber. It’s a great gun for the money. I have a bum shoulder so it doesn’t get shot much. I had the 22 caliber as well but sold it here to another member. Just had to keep one. Both the 22 and 25 caliber are the sweet spots for the 135. They're heavy but so well balanced that you don’t notice the weight. Cocking effort is heavy but I’m 67 years old with a bad shoulder and can one arm cock them all afternoon. Well at least I could before this new shoulder issue. It’s a gun that needs some tuning when it’s new. Unfortunately the newer ones are not finished as well as they once were.

Bear-of-Grayling said:

I have the Hatsan 135QE. Been through the entire gun and trigger with a tune. 25 caliber. It’s a great gun for the money. I have a bum shoulder so it doesn’t get shot much. I had the 22 caliber as well but sold it here to another member. Just had to keep one. Both the 22 and 25 caliber are the sweet spots for the 135. They're heavy but so well balanced that you don’t notice the weight. Cocking effort is heavy but I’m 67 years old with a bad shoulder and can one arm cock them all afternoon. Well at least I could before this new shoulder issue. It’s a gun that needs some tuning when it’s new. Unfortunately the newer ones are not finished as well as they once were. View attachment 367874

Click to expand...

Ive noticed that too. Like late models get some cost cutting compared to first/ early.

rodrigo571 said:

So the 135 is still on the top!

Click to expand...

At or near. I’m the lucky member that ended up with BoG’s .22. Absolute beast of a springer. So much fun.

To you actual question, the physics of high powered springers are the same as before. It’s a compromise of power vs weight vs accuracy vs cost. Technology is about the same. There are just different options than before.

I wouldn't buy a Hatsan springer in .25 again (had a Mod 125 sniper vortex). And definitely not in .30

That level of power is much better suited to .177 or .22 where you can select a variety of ammo. With .25 and especially .30 you're really going to be lobbing the shots. Slower than I think most people would expect from a rifle.

So what I'm saying is the maximum power doesn't matter because I'll take a fast .22 over a slow .25 or .30 that has slightly more FPE.

silvershooter589 said:

I wouldn't buy a Hatsan springer in .25 again (had a Mod 125 sniper vortex). And definitely not in .30

That level of power is much better suited to .177 or .22 where you can select a variety of ammo. With .25 and especially .30 you're really going to be lobbing the shots. Slower than I think most people would expect from a rifle.

So what I'm saying is the maximum power doesn't matter because I'll take a fast .22 over a slow .25 or .30 that has slightly more FPE.

Click to expand...

My 135 in .25 caliber shoots around 800 fps. If one wanted the 135 in 177 caliber I would highly recommend a synthetic stock. The Walnut stock will get eaten up. I filled a Hatsan 95 22 caliber Vortek to 150 bar. Totally ate the stock up. To much for the Walnut.

Hateful McNasty said:

Ive noticed that too. Like late models get some cost cutting compared to first/ early.

Click to expand...

I saw three new 135’s in a gun shop last summer. 177, 22, 25 caliber. I could file my nails on the receivers. The Walnut stocks had no figure at all. Very rough sanded and finished right over the belt sanding lines. Probably could still be tuned into something good but I would want to be holding the one I’m getting.

OK, King of the Springer Jungle. But how accurate is it?

readyfisher9 said:

OK, King of the Springer Jungle. But how accurate is it?

Click to expand...

That's a good question. My experience is the more power a piston gun makes, the heavier and harder it is to shoot accurately. I've always been a fan of springers and will never own a PCP but I think there comes a point where piston power becomes more trouble than its worth.

I've owned a 24 fpe RX1 and currently own a 19 fpe R1. Accuracy on both was/is decent about 1" at fifty yards. My 14-16 fpe HW97 and Hw95 family guns will do better than that with a lot less concentration.

I'm sure my R1 might do better than an inch at 50 one day but it'll be the exception. I'm sure there's a few people here that have high power guns that have done better. Do they do it all the time? Or is it the rosie memory of their best groups? Something we're all probably guilty of to some degree.

My point is if powder burners were out of the question and I was looking for reliable accuracy over 20 fpe I'd be looking hard at PCPs. Luckily for me powder burners are an option for me. I understand they're not for everybody. If someone wants to have the biggest, baddest piston gun for the sake of having it, more power to them. I just suspect they won't be as accurate as other options with similar or even greater power.

readyfisher9 said:

OK, King of the Springer Jungle. But how accurate is it?

Click to expand...

Surprisingly accurate, in line with what Rodrigo571 said or a little better. When the weather cools I’m going to do some pellet testing. Look for that write up in October or later LOL. I don’t expect it to be as accurate as my HW97 or 56T/H or Diana 52 etc. Why should it be? Not a gun that was meant to punch paper. But if you want to dispatch something inside 40 yards it’s your Huckleberry. Mine wears a RD most of the time because it’s perfect for what this gun was made for.

Maybe I am wrong, but I saw a springer version of the Hatsan 135 on Krale. It only came in 30 cal but was cheaper than the Vortex ones. Can anybody confirm. If so, dang I got no money left this year for toys.

Ok, so I decide to shoot my 135QE Vortex at 25 yards. This is with a 4 (I think?) MOA RD and CPHP. Top left is from zeroing. Then 5 shots, gun on my hand, front hand resting on a bag. High and right is me, others are the gun. Not bad for something that thumps like this and using a RD. Gun has more accuracy in it I think.The CPHP are too light, nearly 1,000 FPS. Believe accuracy will improve under 900 FPS. Will test pellets and compact scope in future. They’re a blast to shoot. Unique experience. Only springer I’ve ever pulled into my shoulder. Recoils like a .223.

JDR, they do or did make a spring version. They made a .22 and maybe a .25. Discussed it with a guy on GTA who has one. He’s in Europe. Believe he gets about 32 FPE in .22. I was amazed. No idea if they’re still in production but there were several guys in the discussion and they said you can convert the gas ram.

I did check the website and looks like Krale has the Hatsan 135 in springer version.