As pictured, $325 shipped lower 48, OBO. paypal F&F
Marauder pistol assembled as a carbine in a QB stock. Stock fitment is stable, secure, but unfinished.
The powerplant/tune is basically a .22 version of the 1720T/Rapid 70 I sold a short time ago. The new owner of that gun could provide feedback regarding how the gun shoots. The two performed almost identically, just one in .177, the other in .22. There may be some characteristics that are appealing, while some may not be so appealing. The new owner would be able to provide objective feedback on what I consider as my ideal Prod/1720 tune.....your tastes may vary.
Gen 1 trigger with Airgun Lab shim
Rowan adjustable trigger
<14gr peek hammer
Peek poppet with 2mm stem
Huma reg using larger plenum
1/2-20 adapter with Tanto
Monstrum 1-4 x 20
2 magazines
Includes OEM pistol grip/trigger assembly
OEM forearm
OEM skeleton stock
OEM forearm bracket.
2 sears for the OEM pistol grip---stock sear for use on 7/8 tubes and raised sear for use on 1.25 Gen 1 Marauder tubes.
Tune easily adjusts from 3 mags of FTT 14.66gr around 740 to over 4 mags around 710fps by adjusting hammer spring. Reg is pretty low, IIRC around 110-115bar.
Very sweet shooter. This prod barrel is a bit loose, prefers larger head sizes. Does NOT like CHP's. I only feed it FTT 5.54's and it does 1.5-2" at 50 yards with these. I have no clue how it shoots other pellets, it took out so many pests with FTT's I had no reason to try anything else.
Marauder pistol assembled as a carbine in a QB stock. Stock fitment is stable, secure, but unfinished.
The powerplant/tune is basically a .22 version of the 1720T/Rapid 70 I sold a short time ago. The new owner of that gun could provide feedback regarding how the gun shoots. The two performed almost identically, just one in .177, the other in .22. There may be some characteristics that are appealing, while some may not be so appealing. The new owner would be able to provide objective feedback on what I consider as my ideal Prod/1720 tune.....your tastes may vary.
Gen 1 trigger with Airgun Lab shim
Rowan adjustable trigger
<14gr peek hammer
Peek poppet with 2mm stem
Huma reg using larger plenum
1/2-20 adapter with Tanto
Monstrum 1-4 x 20
2 magazines
Includes OEM pistol grip/trigger assembly
OEM forearm
OEM skeleton stock
OEM forearm bracket.
2 sears for the OEM pistol grip---stock sear for use on 7/8 tubes and raised sear for use on 1.25 Gen 1 Marauder tubes.
Tune easily adjusts from 3 mags of FTT 14.66gr around 740 to over 4 mags around 710fps by adjusting hammer spring. Reg is pretty low, IIRC around 110-115bar.
Very sweet shooter. This prod barrel is a bit loose, prefers larger head sizes. Does NOT like CHP's. I only feed it FTT 5.54's and it does 1.5-2" at 50 yards with these. I have no clue how it shoots other pellets, it took out so many pests with FTT's I had no reason to try anything else.
Last edited: