Looking to buy one of these, I believe there was an original Kalibrgun version made a while back, and various custom ones. This is made to work for the original Cricket 1 or Colibri.
I don't mind which brand it is, as long as it works. Custom made is fine too, just prefer black... As long as it allows me to connect any standard 1/2 x 20 UNF moderator to the shroud.
It uses an outer diameter of 29.50mm with "M27 X 1 male" back threads
Eaglevision makes these that will work perfect "KalibrGun Cricket Shroud 1/2 KGS-10"
eaglevisioncam.com
I don't mind which brand it is, as long as it works. Custom made is fine too, just prefer black... As long as it allows me to connect any standard 1/2 x 20 UNF moderator to the shroud.
It uses an outer diameter of 29.50mm with "M27 X 1 male" back threads
Eaglevision makes these that will work perfect "KalibrGun Cricket Shroud 1/2 KGS-10"
KalibrGun Cricket Shroud 1/2 KGS-10 | Eaglevisioncam
This adaptor allows you to connect any standard 1/2 x 20 UNF moderator to your rifle shroud. before bid you need to make sure you can take the end cap off some are hard need to be heated then unscrew it. Fits to Kalibrgun Cricket Old and New models 177, 22, 25 and 30 caliber More [...]
eaglevisioncam.com